FEG P9M Magazine Disconnect Removal...

[highspeedlowdrag]

Hey guys,

I know a few of you have them on here... Wondering how many of you have taken the mag disconnect out of your pistols - and if so did you have any issues with the trigger (reset, etc...). From what I understand, it should be a fairly simple fix for the extremely heavy/gritty trigger pull on a stock pistol.

Cheers,
hsld.

 

[fenceline]

Youtube Hipower magazine safety removal. Same process. Did it to my feg and was a big improvement.

 

[Hitzy]

Yep, pulled it out of both mine, makes the trigger quite a bit better, and mags drop free now too. If you do it like below, with the trigger still in the gun, you shouldn't have any problems....

 

[highspeedlowdrag]

Thanks guys. I've seen the vids and agree that keeping the trigger in (and just removing the lower pin in the side of the trigger) would probably be the easiest way to go about it. I was only asking as I've heard/read that some people have experienced issues (specifically with the FEGs) with the trigger reset after removing the mag disconnect. I guess the only way to find out is to do it eh?!?

hsld.

 

[alec1157]

Removed mine, but had trouble with trigger reset. I simply bent the trigger return spring to increase tension. Now it works great.

 

[troubleinxs]

Removed mine as soon as I got it! Never had a problem.

 

[Hitzy]

I got a couple of the spare parts kits too. The price of BHP parts is crazy.... The spare parts are everything basically except slide and was about half the price of a BHP barrel.

 

[highspeedlowdrag]

Thanks for the replies guys.

Cheers,
hsld.