Now keep in mind this was my first time firing the CQ311, the first time I have ever shot at 100 yards so it probably just lack of experience.
I was zeroing the rifle in at 25 yards like I read on the interweb. With the front post adjust all the way down I was shooting 2 inches below where I was aiming with an under 1 inch group of 5. At 50 yards I was shooting an inch or so lower with an under 2 inch group. At 100 yards it looks like my 6 inch group was all around the center of the target.
I have read online that some people have filed down the front sight for more adjustment, do I need to do this or am I aiming incorrectly. I am finding the target through the rear peep and aligning the very top of the front sight on the target center.
The other thing I was thinking is maybe this is set up fine because I can get it on the paper at 100 yards where I figured it would be and I could just aim a little bit higher to be where i want to be at 50 and 25 yards.
I was zeroing the rifle in at 25 yards like I read on the interweb. With the front post adjust all the way down I was shooting 2 inches below where I was aiming with an under 1 inch group of 5. At 50 yards I was shooting an inch or so lower with an under 2 inch group. At 100 yards it looks like my 6 inch group was all around the center of the target.
I have read online that some people have filed down the front sight for more adjustment, do I need to do this or am I aiming incorrectly. I am finding the target through the rear peep and aligning the very top of the front sight on the target center.
The other thing I was thinking is maybe this is set up fine because I can get it on the paper at 100 yards where I figured it would be and I could just aim a little bit higher to be where i want to be at 50 and 25 yards.
