FREE M14 Op Rod Guide Pins and ARMS18 Set screws FREE

[Hungry]

I cannot for the life of me find the older thread I posted regarding some FREE pins and set screws for you M14 lovers. So here it is once again:

The inside story with these goodies began when I needed a dozen of each for my own builds. Well, the vendors said they ONLY sell these pins/set screws in batches of TWO Hundred So I ended up buying 200 of EACH (hey, they are only 3 cents APIECE ) and I had a chance to spread the M14 love.... so here ya go!


ARMS 18 Set Screw

* Replaces the set screw Allen head for the front contact pad
* No more having to grind/dremel your handguard
* Low profile and stays hidden
* if you have an ARMS18 scope mount, this is for you... FREE

OP Rod Guide Pins

* Replaces the shattered older generation of pins from Kommunizt Zhina
* 1/8" diam x 3/4" long
* You may need to take a center punch and peen/dimple/raise the metal
* then we Loctite (Red) the guide and pin in place
* Again, this part is also FREE fer ya!


If you need any of these pins/set screws, just shoot me a PM with your address and I will get them off to ya. I'm just paying it forward so don't send me any money or bzzr gift certificates! LOL

Cheers,
Your M14 Super Mod with no life! Editted on 09 April 2013... I ain't a Super Mod anymore... just a regular member now. What fun!!

Barney

 

[Haagen_Dazs]

Building an M1A would be a different story without initiative like this. Thanks!

 

[Chris S]

You Sir are a good man !!

 

[goldenbb]

You Sir are a good man !!

He is a good man.

 

[fenceline]

Hungary sent me one of these pins the other day. You're the man!

 

[nicski]

Don't need it yet but it sure is nice to see people paying it forward. +1 respect for you fine sir.

 

[Rocket Surgery]

You guys peen and dimple your op rod roll pins? I thought the cavity was tapered

 

[Buzzballer]

Hungry. You sir are the best!

 

[Mauser GDog]

You guys peen and dimple your op rod roll pins? I thought the cavity was tapered

Peen the raised surface of the barrel that makes contact with the oprod guide, not the roll pins.

 

[Rocket Surgery]

Oh ok I was confused there

 

[Hungry]

Many sent out in the past few days. Gotta cover as many newbies as I can.

 

[Hungry]

I can also mic / measure your fired brass. All I need is 3 spent cases in a padded envelope. PM me for instructions. I can even mic all your .308 cases from other rifles like hunting and sniper rigs, too. Cheers, Barney

 

[zuke]

Is it too late to get in on this?

 

[Mandown!]

is the brass measurment used to check head space? i've been curious aobut mine. Also considering scoping my shorty now so I might take you up on the offer if it still stands

 

[Hungry]

Nope, it's not too late to get in on the pin and ARMS18 set screw giveaway.

Yes, by measuring your fired brass cases, we can get an impression on how large your chamber is , remember that these are battle rifles and NOT benchrest boomsticks so keep things in perspective. Them F Class rifles (or belly benchrest) are not what you need for the zombie invasion when the hordes are down your street! I've been playing too much of that video game "Left for Dead".

Cheers,
Barney

 

[Mandown!]

Okay can you PM me your info and then next time im out, ill save a few cases to send to ya, just for curiousities sake. My member is still attached after 300 rounds so im going to assume that head space is ok but it would be cool to know.

Ps your a good guy to be helping all these people by spreading knowledge on this platform, and getting people into it in the first place.

 

[Hungry]

And yes, I still have these bits for you ARMS18 scope mount owners and also the loose op rod guide M14 owners.....

 

[zuke]

Received mine, Thank you!

 

[savagefan]

Yes please for both, loved your clinic at the edge a couple years back.

 

[savagefan]

Got mine in the mail today, you sure don't waste any time Barney, thank you so much! I'll toss in an extra donation for the poppy fund in your honour. Why didn't ARMS think of this anyway? All the best, Iain.