French Zulu

jpc

CGN Ultra frequent flyer
Rating - 100%
692   0   0
Were these all made for the African Trade?
I have seen a couple with the hole drilled (not through) on the right side. Any ideas?
This one appears to be 10 bore

be safe

jpc
 
Last edited:
The hole was for a little wooden plug that was a gov't property mark.
Don't know about Africa, but a lot were sold in North America, given how often they turn up. Could well have been marketed in Africa.
There were a large number of obsolete large caliber military rifles turned into cheap shotguns in the later decades of the 19th century and first few of the 20th.
Tabatieres, like this Zulu, Gras rifles, 1871 Mausers, Rolling Blocks were all converted, usually in Belgium. The Geha shotguns are the same sort of thing, but done post WW1, using G98 Mausers. I have the remains of a M91 Mosin Nagant converted into a single shot .410 shotgun. At the time, large bore rifles weren't as saleable as cheap shotguns.
 
Some years ago there was an article in Man at Arms magazine about these converted 19th century arms.
Could be a rather interesting collecting field. They used to be $15 guns. Like everything else, prices have been going up.
If one is mechanically sound, I don't know why it couldn't be used with black powder shells.
 
They all have the hole, it's just plugged with a wood... puck?... dowel? on the better preserved examples.

I had one with a 10 annas indian coin from 1800s in that spot (obviously a latter addition)

Here's a good writeup on them thefirearmblog DOT com/blog/2018/07/10/identify-guns-zulu-shotgun/

Oh, and a good discussion of those plugs here gunboards.com/threads/looking-for-replacement-holy-water-plug.604977/
 
Last edited:
Back
Top Bottom