Front sight loose

[id64]

I just noticed that front sight on my CSA can be moved just by fingers from left to the right and wise versa. Any way to fix it without taking it to the gunsmith?

TIA

 

[P0WERWAGON]

if you a comfortable in doing this, install a set screw in the bottom, replace the pins.

or else contact North Sylva for warranty

 

[Satain]

Negatory.
I just use a dab of my old lady's nail polish and place it on the threads at the base like how it comes from the factory after I sited it in. Should look like this;

 

[DARKSTANG]

if you a comfortable in doing this, install a set screw in the bottom, replace the pins.

or else contact North Sylva for warranty

I think it's safe to say that might be the best advice. If you are handy like Red Green, then fix it or if you know your name is Bubba, send it back to be fixed.

But don't use duct tape! Please!

 

[id64]

I already fixed it myself I wasn't clear in my first post, not the whole sight assembly was loose, but rather base that is moving horizontally and has sight post screwed on to it. I just punched it a bunch of times and it snug now.

Thanks.

 

[DARKSTANG]

It's disappointing when we get something new and we know it will take forever to get it back if we send it away. It takes long enough with transfers. Well, in Ontario, anyways.