G35 barrel in G34

[daka]

I am interested is it possible to exchange original factory Glock 35 barrel(.40 cal) in a Glock 34 (9mm)?
It would be very interesting since i have G22 as well and could use ammo and mags and acctually have two .40 on range.
Can G35 also be used on G22 in case it dont fit G34?

 

[freekshow001]

You can't use a g35 barrel in a g34, the g35 barrel is a tad larger. You can use a g35 barrel in a g22 but the barrel will stickout since its longer.

 

[ted_dent]

Lome Wolf makes a drop in G35 conversion barrel in 9mm (model LWD-359N). There are some vendors on CGN who import Lone Wolf barrels. You could check with them about doing this. You would also probably want to get some 9mm mags (although the 40 S&W mags may work with the 9mm barrel and you would get the bonus of about 13 rounds of 9mm instead of 10 ).

 

[daka]

Lome Wolf makes a drop in G35 conversion barrel in 9mm (model LWD-359N). There are some vendors on CGN who import Lone Wolf barrels. You could check with them about doing this. You would also probably want to get some 9mm mags (although the 40 S&W mags may work with the 9mm barrel and you would get the bonus of about 13 rounds of 9mm instead of 10 ).

Anyway you are not allowed to have more than 10 in any caliber.
I have both 9mm and .40 magazines since i have G22 and G34 but dont really like 9 mm compared to .40.
I was hoping i can get .40 in G34 but looks like i will have to use it in my G22.
Lone wolf barrels are not really my interest.
So just to confirm there is no way i can use G35 barrel in G34???

 

[jjort]

Anyway you are not allowed to have more than 10 in any caliber.

Not true... as long as the magazine only holds a maximum of 10 rds of the caliber for which it was designed it is legal.
so If you can get 13 rds of 9mm in a magazine that was designed for .40 cal it is still legal.
You might try importing a barrel through Brownels. It takes a while and there are a few hoops to jump through but its doable

 

[freekshow001]

So just to confirm there is no way i can use G35 barrel in G34???

As i said above, no. The g35 (40cal) has a slighty larger diameter barrel. If you really had your heart set on using a 40cal barrel on a 9mm slide you could just drill the 9mm slide to accept the 40cal barrel.

 

[ted_dent]

Anyway you are not allowed to have more than 10 in any caliber.
I have both 9mm and .40 magazines since i have G22 and G34 but dont really like 9 mm compared to .40.
I was hoping i can get .40 in G34 but looks like i will have to use it in my G22.
Lone wolf barrels are not really my interest.

Lone Wolf barrels have conventional rifling vs. polygonal rifling in factory Glock barrels so you can use lead bullets without the problem of lead stripping that is common with Glock barrels. Lone Wolf barrels are also fully supported so you don't get the case head bulge that is common with brass fired in Glock barrels.

They will likely also be cheaper than a replacement Glock barrel. However, if you have to have a Glock barrel knock yourself out.

P.S. yes you can legally load 13 rounds of 9mm in a 40S&W mag.

 

[daka]

Well sorry for saying something i wasn't sure about
(I thought i was at the time) and thanks for letting me know about 13-9mm in a .40-10tnds mag.
It is a definetly new information for me.