Gamebore 2 1/2" shells

straightshooter

CGN Ultra frequent flyer
Rating - 100%
13   0   0
Location
Edmonton
I'd like to publicly thank Fassteel for his efforts in bringing in Gamebore shells in 12, 16, and 20 gauge. I bought a flat of each of these for a variety of reasons (to fit 2 1/2" chambered shotguns, to shoot in older shotguns even if they'll accept 2 3/4, and for the felt wads that don't override the chokes in the barrels like shot cups can at times).

Last week I had occasion to use these loads in the field in 6 different shotguns spanning the 3 gauges. I'm impressed!!! I confess to not knowing the details with regard to pressures developed, but whether these are suitable for use in guns equiped with damascus barrels or not (I suspect they aren't), they are fantastic rounds for use in upland game hunting.

I didn't have time to pattern them before taking them out in the field but, if my wingshooting results are any indication, "SUPERIOR" is the word I would use to describe them. Birds were taken on the wing with all 6 of the guns I tried them in.

Shooters who spend tens of thousands on their vehicles, thousands more on guns and gear, hundreds if not thousands on travel and/or accommodations, and then buy the cheapest shells they can find, don't seem to realise what a minor portion of total hunting costs the shells represent.

Like with so many things out there - you get what you pay for. Gamebore shells, IMHO, are worth every penny.

For those who don't know what they are, Gamebore shells are imported from the UK. They're 2 1/2" in length and, by my understanding, they employ nitro powder. The powder used, I heard, is a coarse grain powder that, due to the coarse blaine, burns slower for a lower peak pressure. While these pressures may not be low enough for the oldest shotguns in one's collection, they are ideal for many of the classic guns I like to shoot. Best of all, you don't have the smoke, messy clean up, and corrosiveness issues of black powder.

The reduced recoil, smell, lower environmental impact of felt wads, and apparently superior patterning are welcome bonuses. Shot sizes are a limitation, but the UK-standard 6-shot is perfect for small game including Ruffed, Blue, and Spruce Grouse, Hungarian Partridge, Quail, Woodcock, bunnies, etc.

I wouldn't recommend them as substitutes for black powder only guns, but they're great for nitro proofed classics.

Thanks, again, Fassteel.
 
Last edited:
Seems to me, anything Gamebore makes works very well. Just like all Kent products.
 
The 12 ga are loaded with 1 oz of British #6 shot (as are the 16 ga., for anybody who's interested). The 20's are loaded with 7/8 oz of the same shot.

None of these shells reveal the charge. It's not certain, yet, but I believe Sharptail and I will chronograph these loads so we will at least know what muzzle velocity is produced.
 
I find that specialty shells such as 2 1/2" are costly enough that it makes reloading them a real money saver. Using 7625 powder it is possible to produce ammo with pressures down at the 4900lpi level. These shells can be reloaded without a machine(press) and just a few simple handtools. I once bought a few boxes of Kent 2 1/2" black powder shells and they were the worst BP shells I have used, my handloaded ammo was much cleaner burning and much easier to clean up. I only mention this because some users of damascus guns with 2 1/2" chambers feel safer using the "one true way"..Black Powder.
 
I used a few 12 guage 2 1/2" Gamebore "papers" in #7 shot this past weekend. I bought them at Epps for $15.00 for a box of 25. I had been waiting for months to use them and they are GREAT. First two shots resulted in a grouse and a woodcock. Nice light recoil, just nice...we stood around and smelled the shell after too...mmmmm
 
I was using the red ones that say Pure Gold on the side.

Those are nitro powder (you'd know if they were black powder - there's no mistaking that thick cloud of smoke!)

Side note: The Pure Gold shells in 12 ga. are now gold in colour. Obviously, they don't perform any better because of the colour change, but they look great!:cool:
 
I understand Epps has some 16 and 20 available should anyone be looking for some in ON. I was checking for 12ga, that unfortunately, they do not have in stock presently.
 
I called Kent a while back and the pressures were 6000 psi for the 12, 6500 for the 20, and 8122 for 16 gauge.

I just got the details and it's as you say, except the 12 gauge pressures they gave you are for the "Traditional paper" shell.

For 12 ga. "Pure Gold":

Muzzle velocity - 1295 fps.
Pressure - 7832 psi.

For 12 ga. "Traditional Paper":

Muzzle velocity - 1295 fps.
Pressure - 6226 psi.

For 16 ga. "Game": (NOTE: IIRC, these are called "Traditional Game" on the box, but they're plastic hulls, not paper.)

Muzzle velocity - 1260 fps.
Pressure - 8122 psi.

For 20 ga. "Game": (NOTE: Same deal as 16 ga "Game" on name and hull material.)

Muzzle velocity - 1246 fps.
Pressure - 8122 psi.
 
Gamebore pressures

Wow, the pressures I got were way off. I'll have to check my notes but I'm sure I asked for the 12 gauge Pure Gold pressures. I know the 20 gauge pressure I asked for was the Traditional game plastic hulls and they told me 6500. Was the 8122 for the 20s a typo? I was shooting the 12s in some light English game guns and the recoil seemed pretty snappy. Thanks for setting the record straight.
 
Last edited:
I used the plastic hulled 2 1/2" 12 guage this morning and rolled a #### phesant way out there with my right barrel...they are great shells
 
I really like the traditional game 16 ga. #6's in my old Ithaca Flues. Killed 18 birds with the first box of shells - huns, sharptail, and pigeon. From 15-45 yds. Good shells, and won't beat up a nice old gun.
 
Back
Top Bottom