Geissele trigger in WK180C

[RenegadeMaverick]

Has anyone actually installed a Geissele SSA trigger in a Kodiak Defense WK180C? Any issues?

 

[SomebodyTookMyName]

I've seen/used a few Geisseles in WK/MCR before, and they work just fine, just like pretty much any other two-piece trigger. Not sure if I've used the SSA specifically, but others worked fine.

 

[Ustauk]

Remember, unless you have a SBI Lynx lower, you will either need to use the longer WK/MCR specific trigger pins that came with the rifle, or procure some anti-walk 180 length pins from True North Arms.

 

[RenegadeMaverick]

I’m not so much worried about the factory pins I’m wondering why the safety gets in the way of the hammer cocking back.

 

[Unholysavage]

Put ~500 rounds through my old wk with a Geiselle SSA-E. Its been a while, but i do remember having to pull the Geissele out, after a failed first attempt. I reinstalled it in a different sequence, after seeing people suggest it online, and it fit correctly. Mine was a fairly early model, with the magnetic charging handle.
Try changing up the installation sequence to see if that helps

 

[Bubba Yugga]

G2S worked great. Upgraded to a SSA-E to make the G2S available for my JR.
Nothing but smiles all around!
(Just remember that the Geissele pins are too short for the 180. Keep the originals in there.)

 

[BioPace]

I had a G2S in a new style Kodiak lower and it worked fine. I didn't shoot the rifle in the end but it cocked and clicked and released just right. And felt beautiful.