Getting back into airgunning with a heavy hitting .25 Condor

[randyhub]

An well respected Airsmith installed a new stainless steel regulated valve on my custom 800cc tank.

Now the testing starts, goal is to have as many 50 ft lb plus shots within 5FPS and of course testing the accuracy using .25 pellets and swaged heavy slugs out of my Condor.

Due to the design I can fill with a foster fitting, shoot tethered, or unscrew the large tank and use my emergency small 490cc tank which is great in gopher fields.

Anyways, now the fun starts between barrel swapping, tophat tuning, and so forth during the winter months.



Randy

 

[KDX]

Looks good. Where did you get the regulated valve?

 

[Epoxy7]

Looks good. Where did you get the regulated valve?

Also how much did it increase the LOP? Was looking at this for my Condor.

 

[randyhub]

He ordered it off Aliexpress here is one off Amazon, it has the measurements so I would say around an inch longer in pull.

New Airforce Airgun High Pressure Constant Air Valve for Condor Talon Gunpower CO2 PCP .177 .22 .25 Cal & 8/9 mm Top hat https://a.co/d/8Wa07xM

 

[Epoxy7]

He ordered it off Aliexpress here is one off Amazon, it has the measurements so I would say around an inch longer in pull.

New Airforce Airgun High Pressure Constant Air Valve for Condor Talon Gunpower CO2 PCP .177 .22 .25 Cal & 8/9 mm Top hat https://a.co/d/8Wa07xM

Thanks. Only thing stopping me is that I have mine setup perfectly relight now. The extra LOP would disrupt that. But a regulator would be a huge bonus.

Thanks again. Very helpful info,