Getting the rust out of my CZ858 barrel?

Workingspy

Workingspy

Regular
Rating - 100%
117   0   0
Location
Toronto
Hello I am just wondering what people have used and what they think is the best method to get that pesky rust out of there CZ858 barrels?

So I spent the last hour or so cleaning out my barrel with bore cleaner, copper solvent, I used the copper brush and the soft brush and I am still unsatisfied with the results. There must be a more effective way to remove the rust other then just the standard cleaning products, this time I will just spend as much time as it takes to get it right but that doesn't seem like the best use of time.

Let me know what you think.

Cheers,
Evan
 
Ok I can do that lol, but I was having horrible thoughts of the bad things that could happen if I were to have shot it.

Cheers,
Evan

Captain Paul said:
Evan,

The only advice you need will come from me or anyone else who agree's.

To get that rust out, all you have to do, is shoot the s**t out of that damn thing! Go pump 200 rounds through it and clean it afterwards.

:cheers:
Click to expand...
 
Seriously if you cleaned the #### out of it and nothing happens, shoot the crap out of it. I usually just close my eyes and bump fire everywhere just in case it blows up but hey... that's just me :D

RUST BE GONE! easiest way, and its also tons of fun! Safety is extremely important, but Fun is always my number 1 priority.
 
Shoot a bunch of rounds through it then clean it good. A good .30 cal bore snake is the best. I use one and it makes the bore shine like it was chromed.
 
I did hear that Gunzilla was the good stuff, ill try to get my hands on some and I guess I have to get out too the range again soon as well.

I have also been thinking that the $150 bucks to get my barrel lined and from Dlask would be money well spent.

Cheers,
Evan
 
Use Birchwood blue and rust remover.

I used to use that, it doesn't effect the painted 858 finish and it cleaned all the rust right out of the bore. Then you need to keep lots of oil in it to keep it that way. Gunzilla works pretty good too but I never tried it on my 858.
 
Thanks for the info ill give that a try.

peirecce said:
I used to use that, it doesn't effect the painted 858 finish and it cleaned all the rust right out of the bore. Then you need to keep lots of oil in it to keep it that way. Gunzilla works pretty good too but I never tried it on my 858.
Click to expand...
 
Workingspy said:
Ok I can do that lol, but I was having horrible thoughts of the bad things that could happen if I were to have shot it.

Cheers,
Evan
Click to expand...
Dont worry, i have shot some surplus rifle with very very dirty bore. You could be surprise what 200 rounds down the bore and a good cleaning can do, lot of crap will come out! Nothing work like copper swab, usually packed in a green wooden crate:D

Jocelyn
 
You must log in or register to reply here.
Back
Top Bottom