Gevarm A6

F

Fuzzyfoot

New member
Rating - 100%
12   0   0
Location
Alberta
Hi all, I am stumped on this one, took an old Gevarm A6 apart the other night, thought I was being careful not to lose any parts but as it turns out I may have.

For the life of me I can't figure out how the trigger group assembly mounts to the action when re-assembled! I have the bolt and a small flared round barrel nut and that's it, but what does it go into? Perhaps I dropped a piece? there has to be something else to hold the trigger group to the receiver/action!

Any help/ pics would be appreciated.
 
IMAG2922_zps579ovgxs.jpg


IMAG2923_zpsy4ityl51.jpg
IMAG2921_zpsekfs5sxp.jpg


No, it does not use the 2 pins, 1 bolt with that round nut, some how mounts into the bottom of the receiver..
 
your missing a small allan screw that fit in the trigger housing that tread in the small flared than use a wooden dowell Inside the receiver about 1 inch to hold the nut put the trigger housing firts than you cant put the bolt back
if you need any more help feel free
Jacques
 
Stop using useless photobucket ... all its seem to do is advertise over what you want to actually see...
 
All gevarm's should be taken a part with great care,as there aren't any spare parts available
Most people turn their gun into parts when they loose a critical part
 
Fuzzyfoot said:
Hi all, I am stumped on this one, took an old Gevarm A6 apart the other night, thought I was being careful not to lose any parts but as it turns out I may have.

For the life of me I can't figure out how the trigger group assembly mounts to the action when re-assembled! I have the bolt and a small flared round barrel nut and that's it, but what does it go into? Perhaps I dropped a piece? there has to be something else to hold the trigger group to the receiver/action!

Any help/ pics would be appreciated.
Click to expand...

PM me your cell # or email and I'll send you the A6 schematic.
 
You must log in or register to reply here.
Back
Top Bottom