Girsan Regard Trigger Upgrade Springs

[Ladiesman217]

Anyone know which beretta springs would fit a Girsan Regard full size? I know some people had wilson combat springs in their pistols and they say they work just don't know which ones exactly.

Im trying to lighten the trigger as low weight as I possibly can without affecting its function. Any help would be appreciated. Thanks!

 

[Hitzy]

Remove the mainspring and trim 2-3 coils off it, then you have a D spring free of charge.

 

[TrevorJ]

Most of the Wilson Combat Springs are for the Beretta 90 series, so they should all fit the Girsan Regard. Keep in mind there is also a 92/96 Compact parts, you don't want those.

 

[twoicebergs]

Remove the mainspring and trim 2-3 coils off it, then you have a D spring free of charge.

This will work! Now if you want to buy them, Wolff Springs had the C and D springs. I did all of these with my Regard when they first came out and they all work. The D spring was very nice as a DA pull.

 

[Boomhauer440]

I have the Wolff coil trigger spring in mine and a Beretta D-spring and Decocker mod. As far as I can tell, the only difference between it and a Beretta is the locking block has a slightly different angle. The springs are all the same.