Glock 19 to 23 Conversion and NEW QUESTION!

[prproulx]

I was just wondering what else would be required? Recoil spring?

Is a 3.5lb connector all that is required to lighten trigger pull?

 

[Onagoth]

I'm not sure, but as AFAIK, the 17 can't be turned into a 22, so I would expect the same thing to be true for the compacts.

FWIW, I think going from the 22 to a 17 works, and probably the same for a 23 to a 19, but not the other way around.

Never tested it though

EDIT: I just checked Glock's website, all the dimensions are the same, so maybe it wouldn't be a problem

 

[domyalex]

I'm positive 22 to 17 works, not sure the other way around thou.

Logically, it _should_.

 

[Max Power]

I'm positive 22 to 17 works, not sure the other way around thou.

Logically, it _should_.

Yep 22 to 17 works. LW has a conversion barrel.

As for the logical part is sorta is. The 22/23 being in .40 has a bigger ejection port/locking block. No way you can stuff that into a 17/19 slide...

 

[G07]

I think the ejection port and locking block are the same, but the .40 barrel has a larger outside diameter so it would not fit in the hole at the end of the slide.

 

[frward]

no you cant

 

[Glock4ever]

You need the whole top end and mag (i.e. Slide/barrel and mag). As was mentioned earlier the barrel is too big for the 19 slide.