Got my Star Super B... Pictures up...

After a thorough inspection, mine have no rust whatsoever, in guess some could have been exposed to humidity, mine was in a dry place for sure... JP.
 
Does anybody happen to have a full disassembly guide?

There are lots online for the Star, but very few for the Super Star

I downloaded a bunch of them, and sifted through them. I could not find a complete English version for the Star Model B Super which had good disassembly instructions, BUT, look (google) for the manual for the Super-Star 9mm Largo caliber model, and you will see, all it's controls, levers, etc., particularly the right side take-down lever, is virtually identical to the Model B Super in 9mm Luger (which is our model).
It IS in Spanish, but the diagrams are very good in it, and if you can get a translation, that's just gravy. I found the diagrams alone were adequate. It's 44 pgs long, more than some of the other manuals.
Here's the link:
http://www.9mmlargo.com/star_spr/star_super.pdf

here's another one (has some English but a lot shorter):
http://9mmlargo.com/star_spr/spr_dis_eng.pdf

and just for general info:
http://9mmlargo.com/star_spr/index.htm


Cheers.
 
Does anybody happen to have a full disassembly guide?

There are lots online for the Star, but very few for the Super Star

The Star Super B is very easy to disassemble. Just turn the take down lever on the right side of the frame fully up and then pull the slide forward. Then you can remove a barrel and recoil spring from the slide. And then just turn the front bushing to the left and remove it. That's it. It is one of the easiest pistols for disassembly. May be the Glock is slightly easier to disassemble or may be not.
 
The Star Super B is very easy to disassemble. Just turn the take down lever on the right side of the frame fully up and then pull the slide forward. Then you can remove a barrel and recoil spring from the slide. And then just turn the front bushing to the left and remove it. That's it. It is one of the easiest pistols for disassembly. May be the Glock is slightly easier to disassemble or may be not.

Maybe I'm wrong but I think he's more looking for a full disassembly guide instead of a field strip guide...
 
Quote Originally Posted by 05RAV View Post
The Star Super B is very easy to disassemble. Just turn the take down lever on the right side of the frame fully up and then pull the slide forward. Then you can remove a barrel and recoil spring from the slide. And then just turn the front bushing to the left and remove it. That's it. It is one of the easiest pistols for disassembly. May be the Glock is slightly easier to disassemble or may be not.

Maybe I'm wrong but I think he's more looking for a full disassembly guide instead of a field strip guide...

If he is, indeed, looking for a full disassembly guide which includes a disassembly of the trigger group and other staff inside the frame, then I wouldn’t do that if I were him. I’m pretty well familiarized with that pistol since I’ve been shooting it for around 5 months. On top of it, I purchased a full set of spare parts from Marstar Canada at the same time when I purchased my Star Super B. There is tons of VERY small pins and springs in those mechanisms which can be easily lost in a very short moment during full disassembly especially for the trigger group. Personally, I’d make a trip to a gunsmith.
Anyway, I don’t quite understand why he would look for a full disassembly. As long as a pistol works flawlessly this is not required at all. A routine cleaning can be done after a field strip. Nothing else is required.
 
If he is, indeed, looking for a full disassembly guide which includes a disassembly of the trigger group and other staff inside the frame, then I wouldn’t do that if I were him. I’m pretty well familiarized with that pistol since I’ve been shooting it for around 5 months. On top of it, I purchased a full set of spare parts from Marstar Canada at the same time when I purchased my Star Super B. There is tons of VERY small pins and springs in those mechanisms which can be easily lost in a very short moment during full disassembly especially for the trigger group. Personally, I’d make a trip to a gunsmith.
Anyway, I don’t quite understand why he would look for a full disassembly. As long as a pistol works flawlessly this is not required at all. A routine cleaning can be done after a field strip. Nothing else is required.

Maybe because it is more than 40 years old.
Or maybe its to do a trigger job...

There is a good video of a complete disassembly on Youtube but its for the Star model B, not for the Super model.

It doesn't look to have more pieces than my CZ 75.

https://youtu.be/WOvwQraNZtc
 
Last edited:
Triple K in the US makes replica mags. If you can't find the Triple K mags up here, you can order directly from them (from my understanding, they have no problems shipping to Canada).

https://www.triplek.com/product/star-model-super-b-9mm-9-rd-magazine-or-grips/
 
Maybe I'm wrong but I think he's more looking for a full disassembly guide instead of a field strip guide...

Ben is right. I am looking for a complete disassembly.

Anyways - normally I can figure out how to disassemble it, but I always like to have a guide as a reference when I have never worked with that model before, such as the star. It is a new platform to me.

I'm sure I'll figure it out. Thanks guys :)
 
Ben is right. I am looking for a complete disassembly.

Anyways - normally I can figure out how to disassemble it, but I always like to have a guide as a reference when I have never worked with that model before, such as the star. It is a new platform to me.

I'm sure I'll figure it out. Thanks guys :)

But don’t rush your disassembly. Do it slowly. Like I said before, I've purchased nearly ALL spare parts for the Star Super B and I’m a bit intimidated by a number of small pins and springs in the mechanism. I don’t even want to think what would happen if they started popping out uncontrollably during disassembly!
But if you have a confidence in your mechanical skills go for it and then post a disassembly guide which would be very useful for all the owners.
 
But if you have a confidence in your mechanical skills go for it and then post a disassembly guide which would be very useful for all the owners.

Yeah pcvando, you could do a nice takedown video for us :redface: that would be nice !

BTW, I haven't had any refund on my CC so I guess there's another one coming...
 
Received my Star Super B from Tradeex - Wow! Very pleased. Take a look.
HPcId0z.jpg
 
Last edited:
Yeah pcvando, you could do a nice takedown video for us :redface: that would be nice !

BTW, I haven't had any refund on my CC so I guess there's another one coming...

LOL! Ok, will do eventually. I have not played with it yet ;)

I think my skills are up to par... I mess around with French WW1 semi auto rifles, so I should be good to go haha
 
All in for 330.00, that pistol is a sweet deal, after 3 outings i am impress by the reliability and the accuracy with 147 gr ammo... JP.
 
All in for 330.00, that pistol is a sweet deal, after 3 outings i am impress by the reliability and the accuracy with 147 gr ammo... JP.

At what distance do you shoot your Star Super B? I shoot mine at 20 METERS and have 1 or 2 shots outside of the outer 6 ring with every ammo I use (also tried 147gr). I shoot at a 20 YARD timed and rapid fire handgun target.
One culprit could be a heavy trigger pull (10 lbs) in my Star. Did you measure a trigger pull in yours?
 
Back
Top Bottom