grizzly and winchester??

rally guy

rally guy

CGN Ultra frequent flyer
Rating - 100%
35   0   0
I went to the range for a second time with my mag fed grizzly yesterday. The first time I went I was having some failyer to feed using federal cheap stuff from canadien tire. I polishe the chamber and mag lip and it seem to go fine trought hundrets of dry cycling.

Wen I wen to the range yesterday I brought some winchester 29$ for 100 canadien tire stuff. I had a bit of failyer to feed, like every 3 or 4, but also this time at every 3 or 4 the round woud get stay stuck in the barrel and I would have the hardest time to get them out!

what could be my problem? my chamber and mag lip not propely polish or just my shotgun not liking the cheap winchesterr stuff?

thank you!
 
Last edited:
I assume you mean WINCHESTER, alot of guns don't like the cheap Winchester stuff, I have seen semi's tear the rim off them. Try a brass based load or maybe some buck shot, if the problem persists then it is the gun not the shells.
 
Its usually the shells in my experience. 870's are notorious for not liking bulk winchester ammo. None of my 870's cycle it and seeing as the grizz is a 870 clone that's where your problem might lye. I believe it has something to do with the heat causing the cartrage to expand in the chamber and I gets wedged in. I use federal and feochi rounds and I have never had a problem. Try some different bulk ammo and see what your gun likes. I personally will never use winchester garbage again.
 
Fail to feed

or Extract.

the base of the cheep winchester 7.5 target load, is low based and steel. Difficult exractions. I prefer to use federal target it costs a little more cycles better.
 
I had problems with my mossberg Monday for the first time o
in the 3 years I've been abusing it... Same Canadian tire Winchester target loads. No failures or jams, just kinda felt like it was snagging. I was thinking it was time for another teardown but maybe just ammo issues.
 
You must log in or register to reply here.
Back
Top Bottom