Grizzly CNC Hand Guards @ Dlask Arms Corp.

[Dlask Arms]

So after almost a year of being out of stock we have finally had time to finish a run of our CNC hand guards for the DA Grizzly shotguns. Found here on the website :

https://dlaskarms.com/products/dominion-arms-grizzly-8-5-tactical-aluminum-forearm

 

[cyphie]

These won't work with the mag fed 8.5" grizzly?

 

[ChefBoyOhBoy]

These won't work with the mag fed 8.5" grizzly?

Mine fit the 8.5" stands flgrizz, just not the mag fed one mentioned in the description as not working.

 

[gwhysow]

Do you need a new tube? Pics on a standard gun?

 

[Chevguy93]

Im slow...but would it fit a reg Rem 870? Express or Police or Marine?

 

[Dlask Arms]

Do you need a new tube? Pics on a standard gun?

No Sir, you don't need a new action bar. Simply remove the castle nut on the forward end, remove the plastic POS that comes with the gun and then install our CNC unit and replace the castle nut. Takes about 1.5 minutes total to change and makes a 100% difference in the look and feel of the firearm.

 

[Dlask Arms]

Im slow...but would it fit a reg Rem 870? Express or Police or Marine?

Noop, it will not. You would need to cut and re-thread the action bar to shorten it. Also, the diameter is slightly different between the Rem and the Grizzly so you would need our CNC unit that comes on our Shorty shotties.

 

[srnm]

ABOUT TIME!!!! Order placed!

 

[srnm]

Is it just me or is this version a little bit different then the older ones you made. These seem a little less “bulky/squared”. These look a lot better

 

[Kasey83]