GSG-16 metal magazine coupler
- Thread starter The_Shmoo
- Start date
On evike(dot)com I got a magazine coupler that works well. I just had to attach it at the base of the mags so I didn't squeeze anything. Has worked well for me at the range but I wasn't dropping it on the ground or anything. It was nice because I could still slide one of the mags into my mag. Pouch and the coupler wasn't in the way.
Name: Avengers MP5 / MP5k Metal 9mm Magazine Coupler / Mag Clamp - Black
Product#: 51512
Name: Avengers MP5 / MP5k Metal 9mm Magazine Coupler / Mag Clamp - Black
Product#: 51512
I have these metal original ones from HK Parts
https://hkparts.net/product/hk-mp5-22-gsg5-magazine-clamp-p791.htm
They recommend the following:
Please note: That when using this mag clamp with all GSG5 magazines the rubber pads on the inside of the mag clamp will need to be removed or trimmed or the mag clamp will be to tight and bind the magazine from working properly. The mag clamp is best installed toward the bottom of the mag to prevent binding by the pressure of the mag clamp on the polymer mag bodies.
https://hkparts.net/product/hk-mp5-22-gsg5-magazine-clamp-p791.htm
They recommend the following:
Please note: That when using this mag clamp with all GSG5 magazines the rubber pads on the inside of the mag clamp will need to be removed or trimmed or the mag clamp will be to tight and bind the magazine from working properly. The mag clamp is best installed toward the bottom of the mag to prevent binding by the pressure of the mag clamp on the polymer mag bodies.
