Happily bought used Remy 700 - now concerned

I would add whatever one else has already said plus if the gun was really dirty, the bolt internals are probably pretty dirt as well. Might be the time to clean it out as well.
 
Even if working the bolt slow or somewhat clumsily, the rifle should feed properly. If it doesn't there is an issue.

Clean it up, including taking the stock and mag box off. If there is still an issue it would probably lie with the mag box (possibly binding with the stock), weak follower spring or a feed ramp issue (miscut, burr or grunge in the way.)
 
In my experience with Remington's, (I have a few and have had many) the later models are hit and miss with the feeding due to poor magazine springs. This is the only issue I've had with Remington 700's. On all my present 700's they are either in a chassis using AI mags or have a mag convention kit installed. Prophet River ( where I purchased mine) sells a polymer mag and bottom adapter that screws right to your existing stock and action. 2 minute installation and you have a great and reliable detachable mag system( around 140$) and no more feeding issues. I've heard complaints on line about the quality of the system but I have had no issues, use a torque wrench to install to prevent cracking the polymer and you are GTG. Is it rated for the zombie apocalypse, or other fitictious battles, probably not. For range use and general hunting though, they will last and function as they should. Good luck
 
FLHTCUI said:
Or buy a Leupold Vari X1 or something like that.
Rob
Click to expand...
X2! ......... I suspect the scope in question has some weird dimensions.

As for feeding problems ........ I've had zero feeding problems with dozens of M700s using the factory ADL and BDL bottoms. I wouldn't see any need to swap out the factory set-up for a detach mag deal unless you like the looks of it.
 
There's a reason he sold it - tikka, Howa or Weatherby would be my choice with my preferred choice listed first. You can't go wrong with either. As for the Remy make sure it wasn't one with the trigger recall
 
Look up the trigger recall and run the serial number.
You might be in a favorable position for a newer trigger from Remington.
Failing that find a reputable gunsmith who can diagnose the problem in real time.
Most that can from the internet is speculation and spitballing a possible solution.
Meanwhile hunting season is ticking away and your reading possible solution on a computer screen.
Rob
 
One thing cgn is good for,or most forums for the matter, is everyone wants to come off as knowledgeable by putting the 700 down. Trigger, post 1990 production q.c. etc.
There's a reason it's one of the most popular sporting rifles ever.
Be a boss with that bolt and shoot some nice groups!
 
cath8r said:
One thing cgn is good for,or most forums for the matter, is everyone wants to come off as knowledgeable by putting the 700 down. Trigger, post 1990 production q.c. etc.
There's a reason it's one of the most popular sporting rifles ever.
Be a boss with that bolt and shoot some nice groups!
Click to expand...

I like Rem 700s. Currently own two and have owned at least half a dozen others from 70s examples to modern ones.

You should not have to cycle a bolt "like a boss"

If it doesn't cycle reliably at any speed it has something wrong with it. Period.
 
No offense but o disagree. If you cycle it too slow or choppy 50/50 chance it might hiccup. But that's been my experience. Good day sir!
 
You must log in or register to reply here.
Back
Top Bottom