Harrison Bipod on TRG

[panther]

Hi,
Would somebody guide me if there's any adaptor we can use to fit a Harris Bipod (model BLM) on SAKO TRG??? Thanks to all

 

[ultimate_monkey]

unless im being a moron, im pretty sre your able to add a swivel stud to the TRG, then just mount the harris to that..

this is what u need

w ww.harrisbipods.com/HB6A.html

OR

use part number s5740296, and replace the allen bolt with a swivel stus with fie threads, cut to proper length


or

 

[Shooting Centre]

All you need is the Harris 6A adapter. It fits into the stock rail and has a stud attached. I think it costs about $10.

 

[EC]

All you need is the Harris 6A adapter. It fits into the stock rail and has a stud attached. I think it costs about $10.

What he said, no need to screw anything into the rifle. Slide the adapter on the rail, tighten it and you are good to go. Takes all of 30 secs.

 

[Nic3500]

All you need is the Harris 6A adapter. It fits into the stock rail and has a stud attached. I think it costs about $10.

Yep, no. 6 adapter. Source:
http:// w w w.ltwerner.com/marksmanship.ltwerner/trg22-bipod.phtml

 

[Slavex]

Make sure to position the adapter over the rail screws themselves or you'll pull the rail out of the stock when you tighten it up.

 

[Moparlover]

try the atlas bipod from wolverines. twice the bipod.

 

[panther]

Okay, but is it Harris Adaptor Part No. 6 OR 6A??? Both fits different size rails.

 

[ultimate_monkey]

well.. messure your rail and go from there

 

[Tomochan]

#6 - I have them on both my TRG's. Work just fine and cost between $10-15 depending on where you buy.

 

[panther]

#6 - I have them on both my TRG's. Work just fine and cost between $10-15 depending on where you buy.

Thanks to all. It is indeed Harris #6 stud for TRG, which has a rail size of 9.5mm (3/8"). Cheers

 

[sendero]

Picatinny

If it FIT on a picatinny, i have machinned one that fit the forearm...