*** Hatsan Escort MP-A 12 Ga Semi Auto Shipping Aug 7th ***

Seperate the types when you apply the rules

Semi auto 5 shotgun *
pump action - what ever fits -It a pump
Semi auto hand gun 10
Semi auto rifle 5

( only my understanding , mileage may vary )
 
Last edited:
Have you posted pics of what you were sent Frank? If its that bad, we will know when we see them, if not, perhaps stop bothering us all with this

Bruce


frank2024 said:
I have not mentioned “Mossberg” barrel. Of course you know who I am. You have all my personal info and address. Nice try to make me look like a coward...buddy.

I sent you guys several pictures showing the barrel was very old. I do not care which box you took it from. You guys are not blind, you just do not care. You told me to send it back and pay myself for shipping and your very high “restocking fees”. This was your last answer. What an offer! Who broke off communication again?

It is very fair that if businesses like yours do this to customers they will get angry and go on a crusade. In fact, it would be unfair if I did nothing. “Internet Warrior”…sometimes but I have a more direct impact on firearm buyer were I work. Keep hoping I will not be taken seriously!
Click to expand...
 
patjohnw said:
...
Semi auto *shotgun* 5
pump action - what ever fits -It a pump
Semi auto hand gun 10
Semi auto *centerfire* rifle 5.....
Click to expand...

Fixed it for you plus....

Bolt Action - whatever fits - (barring magazine design restrictions ie AR mags in Rem 7615 etc)

Semi auto rimfire rifle - no limit
 
yoda_thread_fail.jpg
 
stock pad for this gun

2ndShotCanada said:
For anyone willing to pay $75 for the mag extension, Tacstar's Benelli Nova extension fits without modification. If you leave the stock mag tube plug in place it all stays legit at 5 rounds. See my pic below, pardon the poor quality. My Blackberry camera is useless.

IMG-20120712-01083.jpg
Click to expand...

If I want to replace with those after-market recoil reducer , should I take Reminton or Mossberg or other that can fit directly .
 
HONEY said:
If I want to replace with those after-market recoil reducer , should I take Reminton or Mossberg or other that can fit directly .
Click to expand...

To be honest I'm a little confused by your question. If you mean a recoil reducing mag tube extension/plug, then yes they're available but I have no idea what fits, the Tacstar Benelli tube just happens to be the right threading and depth. But if you're talking about a recoil reducing stock (Knoxx, etc) then likely no, I haven't found anything that will fit without modifying.

I found out about the Tacstar tube on another forum and tried it for myself, so it might be best to do a google search and see what turns up.
 
I dont have mine yet, but what about just buttpads do you know if any others are replaceable/swapable just like the benelli's?

2ndShotCanada said:
To be honest I'm a little confused by your question. If you mean a recoil reducing mag tube extension/plug, then yes they're available but I have no idea what fits, the Tacstar Benelli tube just happens to be the right threading and depth. But if you're talking about a recoil reducing stock (Knoxx, etc) then likely no, I haven't found anything that will fit without modifying.

I found out about the Tacstar tube on another forum and tried it for myself, so it might be best to do a google search and see what turns up.
Click to expand...
 
mach 1 said:
I dont have mine yet, but what about just buttpads do you know if any others are replaceable/swapable just like the benelli's?
Click to expand...

Well I'm sure an aftermarket pad could be modified to fit, but if it's a LOP thing, the kit comes with shims, if it's a recoil thing the gun doesn't actually kick much and the stock pad is not all that bad.

I'm sure a Limbsaver grind-to-fit pad could be used, just not sure how good it would look though. You might want to trace the contour of the stock and check it against some redily available pads first though.just my $0.02
 
If about Mossberg 930 butts pad

Looks like you know alot about shortguns , I also had a 930 , I had ask La baron,they didnot carries Mossberg accessories, do you know any aftermarket butts pad (reduce recoil) that can easier to replace the factory one .
 
HONEY said:
Looks like you know alot about shortguns , I also had a 930 , I had ask La baron,they didnot carries Mossberg accessories, do you know any aftermarket butts pad (reduce recoil) that can easier to replace the factory one .
Click to expand...

I'll PM you some ideas and keep this thread dedicated to the Hatsan.
 
Like I said I dont have mine yet so I wouldnt know but im really excited about it, Ill probably never change it but its nice to know the option is there. last thing have you found many accessories for it? side saddle? sling attatchment etc? Thanks!

2ndShotCanada said:
Well I'm sure an aftermarket pad could be modified to fit, but if it's a LOP thing, the kit comes with shims, if it's a recoil thing the gun doesn't actually kick much and the stock pad is not all that bad.

I'm sure a Limbsaver grind-to-fit pad could be used, just not sure how good it would look though. You might want to trace the contour of the stock and check it against some redily available pads first though.just my $0.02
Click to expand...
 
mach 1 said:
Like I said I dont have mine yet so I wouldnt know but im really excited about it, Ill probably never change it but its nice to know the option is there. last thing have you found many accessories for it? side saddle? sling attatchment etc? Thanks!
Click to expand...

You likely can't see it from the pic I posted but it comes with the standard swivel studs for a standard sling. As for the shell holder, Command Arms makes a rail-mounted 5-shot holder that fits well on the forward rail. I took mine off to mount a Norinco CQ (in the pic) as a joke, I can post another pic with it back on if you'd like.

You could always just mount a universal saddle to it, but it usually requires drilling into the stock and seeing as how it already has a spot for 2 rounds I didnt think it was worth it.
 
I meant more of a single point sling attatchment or or quick detatch style haha and na the pic is fine thanks for all the help!

2ndShotCanada said:
You likely can't see it from the pic I posted but it comes with the standard swivel studs for a standard sling. As for the shell holder, Command Arms makes a rail-mounted 5-shot holder that fits well on the forward rail. I took mine off to mount a Norinco CQ (in the pic) as a joke, I can post another pic with it back on if you'd like.

You could always just mount a universal saddle to it, but it usually requires drilling into the stock and seeing as how it already has a spot for 2 rounds I didnt think it was worth it.
Click to expand...
 
You must log in or register to reply here.
Back
Top Bottom