Help 338 Lapua Mag Reloaders

[dizzy dan 1]

I know its Lapua brass but who reloads it & needs the 2 different shell holders.
I need to know the #s of them & make please.Thanks DAN>>>

 

[Glock4ever]

Dan, if I am reading your post right you want to know the shell holder# for the 338 Lapua Mag in the RCBS line? If I have read it correctly the shell holder you need is either 37 or 14. I reload Lapua brass and I could not get number 37 to work - I had both 1x fired brass and 200 brand new brass - 37 is the official one from RCBS. When I contacted them they sent me two shell holders another number 37 and 14. The second 37 didn't work but 14 did. I would recommend if you have to pick one up you try the 14 first - it is very tight on my brass. Hope this helps

 

[dizzy dan 1]

Thanks DAN>>>

 

[wild1]

I bought number 37 to begin with too. Worked on hornady but not lapua. Tried the same thing another fellow did and lightly dremeled the top out and it worked great. Only had to take a few thou.

 

[skidrowe66]

Redding is # 35. Works prefectly!