Help choosing a case trimmer...

Sun_and_Steel_77

Sun_and_Steel_77

CGN Ultra frequent flyer
Rating - 100%
546   0   1
Location
BC
...I'm growing tired of using Lee case trimmer pilots.
I am looking to buy a manual case trimmer and notice that RCBS,Lyman, Forster,Redding etc. all seem to have a similar set-up within a relatively close price range of 120-150$.

So which brand should I buy?. In your experience which do you find most user friendly, efficient, upgradeable etc.??? I am not interested in a "Ford vs Chevy" debate, just hoping to hear feedback from folks who have used/use one of the above and can recommend something for me.

Thanks,
Mad Mikey.
 
If you don't want the ford or chevy debate, then go with a Wilson trimmer.

This is like a bench top lathe when it comes to trimming. All can be had from Sinclair International - just google it.

Also, on the great debate issue - you could also go for the Ferrari of trimmer's if you're so inclined.

Giraud power trimmer - just google it.

Trim's, inside and outside chamfer's all in one, I own one and it's just like using a pencil sharpener when you trim brass.

Cheers, Carl

Sun_and_Steel_77 said:
...I'm growing tired of using Lee case trimmer pilots.
I am looking to buy a manual case trimmer and notice that RCBS,Lyman, Forster,Redding etc. all seem to have a similar set-up within a relatively close price range of 120-150$.

So which brand should I buy?. In your experience which do you find most user friendly, efficient, upgradeable etc.??? I am not interested in a "Ford vs Chevy" debate, just hoping to hear feedback from folks who have used/use one of the above and can recommend something for me.

Thanks,
Mad Mikey.
Click to expand...
 
There can be only one....
MVC-034S.JPG
 
The Lee case length trimmers + electric drill is much easier and quicker to use than a manual "lyman-type" universal trimmer. I hardly ever use mine any more - I may convert it to a power-type trimmer for better ease of use. While I haven't tried the Giraurd unit (above) I have heard nothing but positive reviews; however, it might get expensive if you needed it for many different calibers.
 
Case trimming can be a real bottle neck when prepping cases, and the temptation may be not to bother. This is a bad idea. The only way to speed up the trimming process is to go to a power trimmer, and I also believe the Giraud is the best. Not only does it trim faster, it also deburrs and chamfers in a single pass, so even more time is saves over a manual rotary trimmer.

At one time I would have happily endorsed the Gracey, but after comapring the two I'll stick with my Giraud. If anyone has a Gracey and needs new cutters, Giraud makes carbide cutters for it.
 
Last edited:
I have had a Wilson Trimmer for 20 years and it still does an awesome job. I am old fashioned and like to take my time do all my reloading and case prep etc slowly and methodically. I am not a large volume in a short period of time reloader.
 
Trimmer

I have used Forster, RCBS but this Sinclair Ultimate Micrometer is the best I have ever used $145 I was at shoot on weekend and a very good F class shooter was saying he squares his base of cases with trimmer takes 1 to 1.5 K and makes cases square, I tried this with trimer and he is right the cases are not square. If it helps ??

http://www.sinclairintl.com/product/5497/Case-Trimmers

manitou
 
I am not a fan of the Lyman trimmer. I purchased one, and the allen key hole adjustment was super small. When adjusting, I stipped it - basically making the thing junk. It was the worst $80 purchase I've made in my reloading experiance.

Now I use the Lee trimmer because I use the drill to turn the case as I trim, ream, chamfer, and pocket uniform.
 
martinbns said:
The Lee trimmer save so much setup time unless you have a different machine for each case length. I use an electric drill with mine.
Click to expand...

I use a cordless drill with my Lee trimmers. I find the pilot or case length guage itself constantly comes loose from the cutter. Each couple of cases trimmed I need to re-tighten the gauge to the cutter head and it is a hassle.
The above is one of the main reasons I want to change systems.

BTW that Sinclair set-up looks great.

Thanks for the replies,
Mad Mikey :p
 
I've used a RCBS manual trimmer and switched to the Lyman when it came with a kit I purchased. Both were much the same and don't know about anyone else, but I can't get the adjustments to my liking. I always have to check making sure the brass length remains the same. I don't do a lot of bulk reloading, maybe a thousand rounds a year, so it doesn't really matter that much.
 
martinbns said:
The Lee trimmer save so much setup time unless you have a different machine for each case length. I use an electric drill with mine.
Click to expand...

That system drove me nuts. It took lots of fiddling to get the case to spin concentrically, I always had more variation in length than I was happy with and the case mouths were seldom true. Did Lee change their system, or are you just a very patient fellow?
 
Boomer said:
That system drove me nuts. It took lots of fiddling to get the case to spin concentrically, I always had more variation in length than I was happy with and the case mouths were seldom true. Did Lee change their system, or are you just a very patient fellow?
Click to expand...

:agree: Couldn't have typed it better myself Boomer. The above problems you describe are EXACTLY why I want to be rid of my Lee trimmers for volume re-loading. I find them adequate for trimming a box of bottleneck cartridges by hand, but when I load a couple hundred .357's at a time is a PITA.

Mad Mikey
 
Giraud... it is the only way. I timed myself the other night and trimmed, chamfered inside and out 320rds of 308win in 40min without any mess, strain, or messed up fingers.
 
You must log in or register to reply here.
Back
Top Bottom