Help me Identify These Parts!

A

Amanda

Member
EE Expired
Rating - 100%
91   0   0
Location
Vernon, B.C.
I recently did a deal and got some spare parts. Most of the stuff I recognize but I have a few parts that I am not sure what they are or what they belong to. If it helps most of the parts so far have been RCBS. Exploded diagrams would be great, so would part numbers, but I would be happy if you guys could just point me in the right direction...

1) These 4 items appear to be Primer Drop Tubes. They are metal and appear to be 8-12" long with a spot for a rubber "O" ring about 3/4" from one end.

IMG_1443.jpg

IMG_1441.jpg


2) These appear to be priming assemblies. Again I dont know what they are for, but it looks as though I have two large and two small ones. They also dont appear to be able to be taken apart any more then they already are.

IMG_1444.jpg


3) These look like extended shell holders, however they dont thread into anything. The longer one is marked with a number 2 and has two holes in the shaft. The other two both appear to be the same size, and are marked Lyman. They have one hole in the shaft, as well as a set screw that appear to hold the case in place.

IMG_1445.jpg

IMG_1447.jpg



4) I have absolutely no idea what this piece is. or what it is for. An exploded diagram for this assembly would be awesome.

IMG_1449.jpg

IMG_1448.jpg
 
Well, the shell holders are an older style that lyman (i think) used to use. I have a press that uses them, but they now sell an adaptor to let you use modern ones. What cases are they for? I might be willing to take em off your hands.;)
 
Cocked&Locked said:
Well, the shell holders are an older style that lyman (i think) used to use. I have a press that uses them, but they now sell an adaptor to let you use modern ones. What cases are they for? I might be willing to take em off your hands.;)
Click to expand...

I dont know what cases they are for as they are unmarked, I could measure them for you if it would help.
 
UPDATE: So the priming punches are priming punches for a Lyman Tru-Line Jr. and the taller of the three shell holders is a J type shell holder for the Tru-Line Jr. press, the two shorter ones are Lyman adapters to allow you to use a standard X type shell holder in a J typed press. Still dont know what the red thing is or the drop tubes are for.
 
drop tubes

the drop tubes appear to be the same ones used on my lyman turret press along with the lyman primer attachment , mine has 2 tubes ,1 for large rifle primers and the other for small rifle ,can't help with other stuff. John-Montrock
 
now that is curious, i have one of those presses (great press) but i never even knew that they had a primer feed option. no worries, i only use it for small batches, the large runs go on the LNL
 
You must log in or register to reply here.
Back
Top Bottom