Help me love my m305.

[Odd Shot]

well, glad that is sorted out.

I wonder what is up with the mag causing the action to get stuck.

What mags do you have? Also, you're not riding the charging handle on its return, are you?

 

[Odd Shot]

Did you sort out the action sticking?

 

[Tires]

Nope been very busy lately. All I've done since testing it out is modify the rail I have in hopes that it's out of the way now. Haven't tested that yet. Just hoping that maybe I wont have to spend money on another rail since I have one already.

 

[Odd Shot]

Rail? I thought the scope rail wasn't the issue with the bolt sticking

 

[notsorichguy]

What part of SK are you.....

We have a clinic coming up in May, there should be enough of us there with spare parts and knowledge to get ya up and running....

http://www.canadiangunnutz.com/foru...p-Area-M14-Bootstrap-Clinic-May-23rd-amp-24th

If you're close by Regina, at the very least I could take a look and see what's going on, give you some pointers etc.

Cheers!

 

[Tires]

Rail? I thought the scope rail wasn't the issue with the bolt sticking

The rail the gun came with was cause the ejected casings to get stuck in the bolt.

I did have a case stick get caught in the test with no rail but it was much better.

 

[Odd Shot]

The rail the gun came with was cause the ejected casings to get stuck in the bolt.

I did have a case stick get caught in the test with no rail but it was much better.

So does the bolt ever get stuck without a casing being involved?

 

[Tires]

I know it's a little 'bubba', but I just couldn't bring myself not to try and make it useful. If it doesn't work out then I will order one from m14.ca. The scope is just a 1-4x24. Haven't tried it out yet since modifying it.

What do you think?

 

[Tires]

So does the bolt ever get stuck without a casing being involved?

The only issue that persists is the bolt not wanting to close that last bit when you load a round. It's not every time, but it seems the bolt is a lot harder to cycle with the magazine in the well. For now I think I have to put some rounds through it and see if it keeps acting up.

 

[Dake21]

Is your op rod rubbing against the scope mount? My friends 10-22 had similar issue because of this. Judging by the pictures it seem to stick out a little bit. Maybe having the mag in is give just enough extra resistance to stop the bolt from closing?

 

[Odd Shot]

Is the roller on your bolt freely spinning? Is it properly greased?

 

[yomomma]

Is the roller on your bolt freely spinning? Is it properly greased?

Yah is the bolt roller greased!

 

[Tires]

Yep. All greased.

 

[Odd Shot]

The cut out for the roller in the op rod also greased?

Also, does the bolt seem to stick on a full mag only or at any time?