- Location
- Coquitlam, BC
Got the Krico in the mail today. I decided to take the bolt out for some cleaning. I clicked the button on the left of the stock (kinda like a Win 70 IIRC) and pulled the bolt out. Lo and behold I can't get the bolt back in!! I tried everything, including:
pushing the button while pushing the bolt
pressing the trigger while pushing the bolt
It seems to me the problem is something out of the trigger assembly (I disassembled the stock for a better look) is blocking the bolt from going back into its position. I pull the trigger and a little bit of that protrusion goes down, but not enough to let the bolt slide through. I can use a screwdriver to push that part down but I can't do that while sliding the bolt in (it blocks each other).
I haven't taken apart the trigger assembly/housing because I know it will be a complicated, if impossible job for me to put back together, and I don't even know if it will help.
Please someone help me!
pushing the button while pushing the bolt
pressing the trigger while pushing the bolt
It seems to me the problem is something out of the trigger assembly (I disassembled the stock for a better look) is blocking the bolt from going back into its position. I pull the trigger and a little bit of that protrusion goes down, but not enough to let the bolt slide through. I can use a screwdriver to push that part down but I can't do that while sliding the bolt in (it blocks each other).
I haven't taken apart the trigger assembly/housing because I know it will be a complicated, if impossible job for me to put back together, and I don't even know if it will help.
Please someone help me!
