Help please!

[klepete]

I'm new to reloading; I have a Lyman T-Mag II Reloading Press. Problem is witht the primer feed. I have tried adjusting it 30 different ways. It works fine, dispensing 1 primer at a time then it dumps several primers at once. Is there a fix for this. I would appreciate any advise.

 

[dumbdawg]

yea leave the primer feeder alone and get yourself a Lee Auto-Prime.Its a hand held primer

 

[fratri]

yea leave the primer feeder alone and get yourself a Lee Auto-Prime.Its a hand held primer

What he said, its a great tool and easy to use all for $15...

 

[klepete]

Thanks fellows, I'll give it a try

 

[tigrr]

My hands can't take the Lee Auto prime hand primer anymore so I bought the Lee Auto prime II. It fits on top of my press and pushes the primer up into the case, with the arm giving me more leverage, easier on the hands.

 

[thecollector]

It works fine, dispensing 1 primer at a time then it dumps several primers at once. Is there a fix for this.

Probably a burr in the primer retaining plunger area; remove this by backing out the small retaining screw, spring, and plunger. Check the plunger and its bore hole in the aluminum arm; if there is any hint of burring, dress them down, clean every thing with solvent, and re-assemble with some light lubrication. The primers dump when this plunger sticks in its bore and doesn't move back out from the spring force.