Help- Stag 10 feeding issue

[koseli]

is it all through the mag or usually just the first round? i have had several mags pinned too tight for 5 rounds and the bolt has a hard time stripping the first round off?

it is all through the mag..

 

[koseli]

What do the cases look like after you chamber and fire a round, are there any noticeable scratches?

cases look fine! no scratches or dings

 

[koseli]

I would say that is not definitely not normal. Was the gun produced by Stag? Or did IRG build it to specs and/or assemble from parts? If the former, I'd go straight to Stag and ask them to resolve it. You shouldn't need to do what you are doing to "break-in" a rifle.

i am not sure, it was the stag 10 "lightweight version" with the faxon barrel amd magpul stock. yes i may have to give them a call if i dont get it working by next range trip.

 

[jethunter]

Strip down your bolt carrier group completely and brush clean it assembly and lubricate the living hell out of it but also check your feed ramps on your barrel

This.^ Clean BCG and then run it wet for break in. In fact, run it wet all the time even after breakin. Makes better reliability and easier cleaning.

Remington action cleaner is good carbon solvent for the BCG.