HELP with HPA set up

R

roccoskeet

CGN Regular
Rating - 100%
86   0   0
Hi fellas:
I have a air rifle I want to go to HPA in. I have the bulk fill head with a 1/8NPT thread in that I can screw a 90. Degree elbow into and then attach a "12 inch braided line onto a 13oz HPA tank with 13-1400 psi.
I will be charging the small bottle from my scuba tank
I have a yoke style valve with a female paint ball quick connect on it but no braided line.
What I need help with is some one or some dealer that I can purchase the following from.
Two "12 inch braided steel lines
One with male/ female paint ball quick connect.
One with male/male
And 1 male quick connect fitting with 1/8 NPT thread.

I am having NO FRIGGING luck finding a dealer to get thisstuff from with not going to a US dealer. There has to be somewhere in Canada.

If you can point me in the right direction I'd really appreciate it.

Thanks
Rocky
 
roccoskeet said:
Hi fellas:
I have a air rifle I want to go to HPA in. I have the bulk fill head with a 1/8NPT thread in that I can screw a 90. Degree elbow into and then attach a "12 inch braided line onto a 13oz HPA tank with 13-1400 psi.
I will be charging the small bottle from my scuba tank
I have a yoke style valve with a female paint ball quick connect on it but no braided line.
What I need help with is some one or some dealer that I can purchase the following from.
Two "12 inch braided steel lines
One with male/ female paint ball quick connect.
One with male/male
And 1 male quick connect fitting with 1/8 NPT thread.

I am having NO FRIGGING luck finding a dealer to get thisstuff from with not going to a US dealer. There has to be somewhere in Canada.

If you can point me in the right direction I'd really appreciate it.

Thanks
Rocky
Click to expand...

d&l airguns for accessories very good dealer polite, knowledgeable, great service best I have encountered.. steel lines at canadian tires.. braided air lines must be rated @ 3500 psi if filling from scuba tank.. you could use 1/8 npt press fit with poly lines for up to 1500 psi. i had similiar problems converting 2240 into rifle..check here for some info:
more info here
 
You must log in or register to reply here.
Back
Top Bottom