HK91/G3 magazine dimension

[sillymike]

Hello,

Could anybody tell me the dimensions (Width/depth) of a HK91/G3 magazine, below the re-enforcement?

Thanks!

Mike.

 

[OneBarfly]

How close do you need to be?

Looks to measure (with a tape) as follows:

1" thick
4" high side below the reinforcement
3 1/2" low side below the reinforcement

What'cha doing?

 

[Deckard]

Adapting them to a bolt action me thinketh.

 

[Ardent]

The G3 mags are double feed at the lips still, no?

 

[sillymike]

Thanks onebarfly!

Bolt action rifle? not quite... I was having a look at magazines for the HK770 and tought they looked pretty similar to the HK91, but without the reinforcement. Used steel magazine for the HK91 can be add for $5-$6 US... instead of $70 for 770...

Here's the dimension I am looking for (These numbers are from the HK770)

Mike.

 

[Klunk]

Uhhh...that IS the same mag.....looks freakin identical to me

And yes, Ardent...they are double feed right to the lips

 

[sillymike]

OK, I think something is been lost in the translation
I used the picture of a HK91 magazine to identify the dimension I am trying to obtain. The numbers are from the HK770 magazine.

This is an HK770 magazine...

Mike.