Holster for Norinco NZ85

[Rusty Shackleford]

\Anybody know what's a good holster that works for the NZ85? I bought a Fobus Kydex CZ holster today, but the Norinco must be a lot wider than the cz because it doesn't fit at all.

 

[Rusty Shackleford]

I need it for my BB Course in 3 weeks.

 

[Deckard]

There was a thread a long time ago on this.

 

[Colin]

The slide for the NZ-85 is a few mm higher than the CZ, you will likely have to try some out at the gunstore, phone them and see what they have and if you can bring your gun down to try them.

 

[Rusty Shackleford]

There was a thread a long time ago on this.

I found another thread on this and tried what they suggested. I drilled out the rivets on the Fobus. Then I put it back together using some screws with some washers between the 2 kydex pieces to create more room. It looks like it's going to work ok.

 

[Deckard]

Perhaps put a link for those just joining us?

 

[Rusty Shackleford]

Here's the thread

http://www.canadiangunnutz.com/forum/showthread.php?t=139092

Post 13