- Location
- interior b.c.
I just buy them for $2 each at 7-11.
Jamie said:airsoft pellets,they float and weight next to nothing
Jamie
TPK said:As mentioned earlier, a length of inner tube filled with sand with wood strips screwed together at either end. You can vary the lengths so they stack nice. Jeans and the like will "leak" sand unless an inner liner is used but even then, the material will likely let go long before the rubber on an inner tube will. You can wipe the outer surface of the rubber clean, with cloth, you will basically be putting your rifle barrel on sand paper. Also, you can leave these outside and the sand won't get wet inside. When this happens with cloth bags, they get much heavier and lumpy. In minus temps, the wet sand freezes like a rock, the rubber ones will have dry sand inside so you won't have that issue. Of course you can bring the cloth ones in to prevent the above issues but I prefer to leave them at the range ready to go, one less thing to load when I go shooting. Cloth is much more likely to split or rip when being tossed around all the time loading and unloading them.
crazy_davey said:Who would have thought homemade sand bags could be so technical![]()
![]()
geologist said:Old jeans legs, sealed off with haywire. They're really Trailer Park Boys!
Thats cause they don't put the sand in a heavy plastic bag prior to the jeans, and or just fill a bag that gets eaten by the sun . I know exactly what you mean, had to clear quite a few sand hills off benchestonyg said:Sand is a pain in the a## . Too many times I've had to clean up after others have left sand everywhere on the bench.I did a little measuring and made up a 4 by 4 with a notch padded with thin carpet .Works for me. Lite as well.
![]()
keith
double gun said:I switched to crushed nut shells(the ones I use in my case tumbler). Its way lighter, doesnt hold moisture like sand, and they are too big to work thru whatever material you use.




























