Hornady 6.5 PRC brass

[fuzzy39]

Hi there. Anyone know where I can find some Hornady 6.5 PRC brass in this Country? I have a Savage Ultralight with the Proof barrel waiting for me at my local gun store and a couple boxes of factory ammo but I really want to handload for this bad boy. I’ve also got the Leupold Freedom 6-18x40 CDS waiting. I can’t wait to get this guy out to the range then maybe for late season Saskie whitetail.

 

[todbartell]

I haven't seen any since February

 

[stubblejumper]

Skip the Hornady, buy Gunwerx from Precision Optics if they still have any. I started with Hornady, and was very disappointed in the quality. I then purchased some Gunworx, and groups tightened up, and no more issues.

 

[Weatherby Fan]

I’ve used tons of the Hornady brass without one issue, nothing wrong with it,

I may have some Brass at home, I’ll check tomorrow when I’m home from work

 

[remington jim]

Skip the Hornady, buy Gunwerx from Precision Optics if they still have any. I started with Hornady, and was very disappointed in the quality. I then purchased some Gunworx, and groups tightened up, and no more issues.

What happened with the Hornady brass ? Just wondering ! thxs RJ

 

[stubblejumper]

I found that with the Hornady cases, I had to anneal after every firing to maintain the neck tension. A friend had a neck break off of a prc case and remain stuck into the chamber on the third firing. I weighed ten Hornady cases, and the weight varied by three full grains. With the Gunwerx cases, the weight was within .3 grain. Groups with Hornday cases were over 1/4" larger than with the Gunwerx cases.

 

[remington jim]

I found that with the Hornady cases, I had to anneal after every firing to maintain the neck tension. A friend had a neck break off of a prc case and remain stuck into the chamber on the third firing. I weighed ten Hornady cases, and the weight varied by three full grains. With the Gunwerx cases, the weight was within .3 grain. Groups with Hornday cases were over 1/4" larger than with the Gunwerx cases.

Hmm ! I'm gonna check out the weights a little closer as I have a LOT of diff Brands I will check for the 6.5 CM including G Werx;s - RJ

 

[todbartell]

I love my Hornady PRC brass, but I anneal every firing on an AMP. On 8 firings and going strong

 

[remington jim]

I love my Hornady PRC brass, but I anneal every firing on an AMP. On 8 firings and going strong

Do you weight ALL your brass and sort it ? RJ

 

[Buckmastr]

Sounds like the perfect cartridge...

 

[Weatherby Fan]

Hi there. Anyone know where I can find some Hornady 6.5 PRC brass in this Country? I have a Savage Ultralight with the Proof barrel waiting for me at my local gun store and a couple boxes of factory ammo but I really want to handload for this bad boy. I’ve also got the Leupold Freedom 6-18x40 CDS waiting. I can’t wait to get this guy out to the range then maybe for late season Saskie whitetail.

I do have a cpl spare boxes of new Hornady 6.5 PRC brass if you want it.

 

[Hitzy]

Hornady brass has been hit or miss with me, generally though, their marketing baby cartridges are decent. Others not so great.

 

[chuck nelson]

I’ve used tons of the Hornady brass without one issue, nothing wrong with it,

I may have some Brass at home, I’ll check tomorrow when I’m home from work

I have had excellent results with Hornady brass.

 

[chuck nelson]

I love my Hornady PRC brass, but I anneal every firing on an AMP. On 8 firings and going strong

I tried to make Hornady 30-06 brass puke one night last week with no annealing. I quit after 10 firings because I got tired of the five minute drive.

 

[fuzzy39]

I do have a cpl spare boxes of new Hornady 6.5 PRC brass if you want it.

I’d take them.
Michael

 

[Weatherby Fan]

I’d take them.
Michael

Brass is shipped, PM sent

 

[adamg]

I've heard that Neerlandia Coop in Alberta has some 6.5 PRC brass available.