Hornady Microjust

[JNA]

Hey Guys,

Wondering if any of you have experience with this tool and if it is worth getting? Also do you guys happen to know where one could purchase this tool?

 

[frigpig]

I use it. The measurements are arbitrary but easily done with your fingers quicky and accurately so that's why it's on my die. I picked it up at Wholesale sports of all places.

 

[frank223]

I use on too. Ya the numbers on it are not exact by any means but the adjusted is consistent. I bought on and use it on all my seating dies.

 

[JNA]

Didn't see it at wholesale sports

 

['Boo]

Until you buy your seating stem here is a cheat-sheet for some standard seating dies:

Seating Stem Adjustment
(Manufacturer - tpi)
*Forster/Bonanza - 32
**Forster/Bonanza - 28
C-H/4-D - 20
Dillon - 20
Hollywood - 18
Hornady - 18
Jones - 20
Lee - 18
Lyman - 20
RCBS - 28
Redding - 20
Wilson - 20

* 6mm and smaller
** .25 cal and larger

 

[katanaa]

That should be 20TPI for the Hornady custom grade dies. The micro just gives you quick reference for your seating depth. I really like it if you adjust it 0.002" the bullet is seated an extra 0.002". Also you only need one as it can be swapped out on all the Hornady dies.

 

[JNA]

Apparently it is only for hornady dies and does not fit other dies, which is the ones I was going to be using it on .