Hornady SST, M14

I use H 165 gr SST for deer hunting in my Norc... 43 gr of H4895, CCI 200 primers (hard), COL 2.817"... very accurate..

also loaded up a batch of H 150 gr SST with 40 gr of H4895.. also very accurate. the 150's print a bit higher on the target..

both loads group around 1 to 1.5" at 100yds and about 2.5 to 3 inches at 200yds.. and son on..

the 165 grains trajectory works out to +2.5" at 100 yds , 0 at 200, -10.5 at 300.

this load (165gr) killed 2 deer in the last 2 seasons.. good expansion and both dropped on the spot with no chasing or tracking required.. one at roughly 200 yds and the other at about 70 yds..

IMHO they work just as well as the $40/box plus factory stuff.
 
Back
Top Bottom