How do I remove the barrel on a cz858?

[TheArmyMan204]

Is it threaded into the reciever? Or pressed? Any tips appreciated, thanks.

 

[Dad003]

it is pressed

 

[P0WERWAGON]

search on youtube for vz58 building. there are a few videos from americans building parts kits. lots of force required there to remove/install

 

[Kevin M.]

Pressed, likely need a multi ton jack and some kind of custom jig to remove it.

 

[TheArmyMan204]

Pressed, likely need a multi ton jack and some kind of custom jig to remove it.

Not a problem I'm a welder/fitter at a custom shop haha thanks guys

 

[volkov956]

ur nutting cutting the reciever are u...

 

[Ms359]

Don't go doing anything rash just yet.

 

[P0WERWAGON]

http://www.pirate4x4.com/forum/outdoor-sports-recreation/692191-home-building-vz-58-a.html

 

[Wolf@TS]

Not a problem I'm a welder/fitter at a custom shop haha thanks guys

Good to know...maybe just in case ??

 

[burnt_servo]

i thought the barrels where pressed in , then pinned into place ?

 

[D3TH_OVRH3D]

They must only have shorter lengths of PVC left at his local hardware store lol! j/k, of course.

 

[ken 1]

The answer to your question is you don't remove the barrel. What you do is stand your ground and fight along with the rest of us who are willing to place it all on the line.

 

[diemaco]

They are pinned as well

 

[Leviathan024]

The answer to your question is you don't remove the barrel. What you do is stand your ground and fight along with the rest of us who are willing to place it all on the line.

This

 

[Jäger1]

The answer to your question is you don't remove the barrel. What you do is stand your ground and fight along with the rest of us who are willing to place it all on the line.

This.

 

[TheArmyMan204]

The answer to your question is you don't remove the barrel. What you do is stand your ground and fight along with the rest of us who are willing to place it all on the line.

Trust me when I say I'm in for the fight. Don't mistake this thread for anything less then satisfying the "prepper" side of my brain

RCMP won't ever see a penny of my hard earned property. Sold it all to mike from Canmore

 

[Yukon1911]

Barrel on the CZ is pressed in and pinned. Once the pin is removed the barrel can be pressed out with a 20 ton press.

Its always good to be prepared for the worst and fight for the best!