How do I remove the Mepro from my Tavor?

You're probably going to have to buy a rail then?

Wish I could be more help. I'm still waiting on my Tavor. There should be plenty of guys on here with a guide on how to pop that baby off though.
 
Take the rifle apart fully and take the barrel out with the barrel wrench because the mepro is attached to the barrel itself, loosen the nuts take the mepro off then put on a aftermarket rail from can-am or dlask ect... MAKE SURE YOU PRESS IN THE TAB ON THE OTHER SIDE OF THE BARREL RELEASE LUG WHILE YOU RELEASE IT,, ALSO MAKE SURE TO TAKE OFF THE HAND GUARDS AND PULL OUT THE CHARGING HANDLE ROD BEFORE YOU RELEASE THE BARREL OR THE ROD WILL GET DAMAGED..
 
You'll also need a Mepro picatinny adaptor to install your Mepro on another firearm (if that is your intent). I kinda like the Mepro on my shotgun.
 
You need to take the barrel off the rifle as the Mepro is attached to the barrel. Look at this URL on how to dismantle the rifle. He is doing it to reverse the Tavor to the left side but will show you how to remove the barrel:
http:// www .ltwerner.com/tavor.ltwerner/howtoprocedures.phtml?id=10

Just remove the spaces.
Nic
 
I got all whit pics!

On Google, just type:
"Tavor armorer manual"

Goog luck! 2 weeks ago, i got a NEA rail on my Tavor, now i shoot 2 feets under the bull @ 250 ft :((
 
You must log in or register to reply here.
Back
Top Bottom