- Location
- Nova Scotia
Lets chamber a live round in a gun that's KNOWN to slam fire, and unknown how to unload. Maybe should have tested it or played with it unloaded. IQ of 135, yet my avg IQ knows that's a stupid idea.
Thanks mumbles this is kind of response i was looking for. Thanks to the others who also tried to be helpful.
ok lets get something straight here.
I have been hunting and othewrwise using firearms for over 40 yrs without one incident
Of course i did a function check after reassembling the gun which was to be finished off by function testing and finally firing at a range. In lieu of of an available range i just chose to function test loading it and manually unloading it as the final test i could do before the firing range.
Wouldnt i look fukking stupid if i attempted to load my rifle at the range for the first time and then figured out the new magazine doesnt work properly or my gun jams. 2 hr drive to the range wasted![
Im shocked and appalled at the JUDGINESS of half the responders. They must be perfect like Jesus!
all i was asking for was normal functions of this rifle with and without a loaded or unloaded aftermarket banana mag in it.
I wonder how many of my detractors even have any experience with a stock SKS, let alone a modded one with aftermarket clip? Im betting close to none.
it seems we have some closet LIBERALS in here who mustve voted justin trudeau, no doubt they love justin bieber too
FYI I have and IQ of about 135 for the not so few of you trying to look down on someone else to feed their ego and feel better about themselves at my expense
Shameful behavior if you ask me.
I thought this was a club of like minded individuals who were interested in sticking together and trying to keep our gun rights alive in this country, instead of bickering amongst ourselves like the real liberal voters want
so we dont provide any kid of solidarity front against them.
Loading guns in your basement when you never used them before? Risky, Not to mention how its going to feel when you blow your ear drums out. Anyways....
Their is a mag release that should drop free your magazine, remember to bolt ALWAYS has to be open to put the magazine in. If your bolt wont pull back you have a problem.
Because you've seen it happen at the range I assumeSame way as you can take SVT bolt from the bolt catch by tapping the stock against your own body
![]()
On the other hand, OP, just like people said, if you are not familiar with certain firearm - youbute is your friend. If you are not familiar with computers - range is your friend. You WILL find people how have knowladge about your firearm. Well, 95% of the time you will. Guys at my local range are more than willing to spend an hour with new person just to explain to them how firearm operates and teach them about major issues they might encounter. So 2 hour drive in order to learn how your firearm functions is not a waste of time in my books.
Just to let you know, You can drop your firing pin by simply smashing you guns butstock on the ground. It doesn't even have to be hard just a simple slip on the firearm. Ask me how I know?
You'd think with such a high IQ a little common sense would come with it.
Sweet Christmas this thread is full of fail. "I don't want to look stupid at the range, so bc of my insecurity I'm going to mod an sks (fail), load live rounds in my basement (fail), then ask for help because I'm too stupid to learn the function of a simple rifle before I mess with it (fail). Then, to seek help from my betters I'm going to post on a forum about how I just committed a crime (fail), and when people criticize me, I'll just tell them how good I am with firearms (fail), and that I'm smarter than they are (fail). Also, you guys probably haven't even touched one o' these here SKS rifles, durrrrr (fail)."
Please stop being an idiot, for the sake of all gun owners.

Thanks mumbles this is kind of response i was looking for. Thanks to the others who also tried to be helpful.
ok lets get something straight here.
I have been hunting and othewrwise using firearms for over 40 yrs without one incident
Of course i did a function check after reassembling the gun which was to be finished off by function testing and finally firing at a range. In lieu of of an available range i just chose to function test loading it and manually unloading it as the final test i could do before the firing range.
Wouldnt i look fukking stupid if i attempted to load my rifle at the range for the first time and then figured out the new magazine doesnt work properly or my gun jams. 2 hr drive to the range wasted



























