How is your 338 Lapua / L.Imp scoped?

How is your Lapua/L.Imp scoped, or how would you scope a Lapua/L.Imp?

  • I have a Lapua/L.Imp - I use a Leupold Mark 4

    Votes: 5 6.1%
  • I have a Lapua/L.Imp - I use a Nightforce NXS

    Votes: 21 25.6%
  • I have a Lapua/L.Imp - I use a Schmidt-Bender

    Votes: 9 11.0%
  • I have a Lapua/L.Imp - I use a Bushnell 6500

    Votes: 1 1.2%
  • I have a Lapua/L.Imp - I use an "Other' (please describe)

    Votes: 12 14.6%
  • I do not have a Lapua/L.Imp but I would use a Leupold Mark 4

    Votes: 2 2.4%
  • I do not have a Lapua/L.Imp but I would use a Nightforce NXS

    Votes: 16 19.5%
  • I do not have a Lapua/L.Imp but I would use a Schmidt-Bender

    Votes: 11 13.4%
  • I do not have a Lapua/L.Imp but I would use a Bushnell 6500

    Votes: 3 3.7%
  • I do not have a Lapua/L.Imp but I would use an "Other' (please describe)

    Votes: 2 2.4%

  • Total voters
    82
I like S&B can you tell

DSC06419.JPG
 
mine first started with a elite 4200 and after a few years, zero started to shift olmost every shots
then I put a nikon but then it is the optilock rings that let go

now I made a HD picatinny rail and put a vortex viper PST and holds good for now
I keep my finger crossed
 
I don't have a 338 Lapua...yet, but I am thinking possibly later this year. If/when I do, the Razor will come off the 260 and go on the new toy and I will put a PST on the 260. Can hardly wait!
 
Last edited:
I've just put together a Savage 110 BA in 338LM natch. Fitted it with a Sightron SIII LR 8-32X56 with Mildots after talking with Jerry at Mystic. Looks like it's going to be a killer combo for my needs.
 
OOoopsy I voted mk4 but it's actually just a POS VX III 6.5-20X50 LR that I had a TMR installed into. Sorry for the miss vote but it's pretty close. The rifle is a Sako TRG S 995 all factory except for a brake. The scope sits in boring old Talley fixed rings, the low 30's with a 50mm obj just fits those 995 perfect if you don't need elevation.
 
Back
Top Bottom