How the heck did you remove your CZ858 Wooden stock??????

[Mermaniel]

I can't find a screwdriver long and wide enough...I guess I might have to swing by to Canadian Tire or something...that thing is on tight!!!!!!!!!!!!

Can anyone let me know how the heck you did it???

thanks.

 

[bfiles]

Big long flat head screwdriver with a square shaft, lol.
Put a vise grip on the shaft of the screwdriver and work it loose. If possible spray some wd-40 or something inside the reciever where the bottlm of the screw is maybe inbetween the reciever and stock aswell. They are in there good.

 

[bfiles]

Tire iron may also work.

 

[Slowbalt]

Reshaped tire iron for me.

 

[Captain Paul]

also, try drinking booze straight or on the rocks. it helps with strength! Good luck and keep the swear jar close by!

 

[Mermaniel]

thanks guys! I guess Im off to canadian tire to get a jackhammer! lol

Already have a 12 pack at home waiting for me. lol

 

[5440fight]

Joke, please do not use a saw. I used a ratchet, extension, big slotted end, plenty of grunting.

 

[Akronym]

not gonna lie I paid someone to do it to avoid the hassle.

 

[.30/06 FTW]

Used a big ass socket screwdriver bit that I borrowed. That sucker was tight!

 

[Mermaniel]

Thanks again. Couldn't for the life of me do it with a large screwdriver...going to shop again for a large screwdriver bit for my socket wrench...gebus...lol

 

[spooksar]

When you get the socket put it and the extension in the screw and give it a good wack with a hammer. Just be carefully when you do this. It may help loosen it up

 

[TERMINATOR101CA]

Well , you need to put your purse down and use both hands on the screwdriver.

 

[Mermaniel]

Well , you need to put your purse down and use both hands on the screwdriver.

Lol. I guess I'm not manly enough...I think the issuewas more that the screwdriver head wasn't tight enough in the slot...that what she said.

 

[bfiles]

Also try tightening the bolt just a bit more the loosen it off. May help break the seal.

 

[Visleguy]

Well , you need to put your purse down and use both hands on the screwdriver.

Nice! Lol!

 

[Walther_PPK]

I bought a long slotted screw driver with a hex shaped shank so you could put a wrench on it.

Had to shape it with a grinder so it didn't tapper in at the end and fit the screw head better. It was in there REALLY tight. It will go "SNAP!" when it finally breaks free.

 

[AlbertaGunslinger]

Use the bayonet, it works perfectly no need to buy a screwdrived you will never use again.

 

[ChrisAlston]

It took me holding the gun as tight as I could while my buddy reefed on it with a big screwdriver. Lots of grunting, swearing, wrestling back and forth etc but it finally came loose. It would have looked funny to someone watching but man that thing was in there tight.

 

[Grizzly Adams]

For my LE I used a ratchet with a long extension and a screwdriver blade socket.


Grizz

 

[canadianmarksmen]

i made my own tool.. i took a chisel and filed it down to fit, and welded rebair onto it and made a kind of tire iron haha