How to remove trigger lock?

I did not watch the video, but its a doddle with a very small flat screw driver. Especially if you already have a lock that is open to figure out where to put pressure. Like I said, a doddle.
 
Had the same thing happen with a Weatherby Mk V that belonged to a buddy.
I wish I had video of me firing up a 7" Makita side grinder and taking the aluminum cap off the offside. (at which point they fall apart)

I think my buddy still has nightmares about that one.
 
A paper clip. push in on the side of the teeth to release the lock. My 9 year old nephew can show you how its done.
 
if they re master trigger locks, they only come keyed to 4 different keys.mine are all keyed the same but a friend has 3 of the 4 different keys and i have the other.
 
if they re master trigger locks, they only come keyed to 4 different keys.mine are all keyed the same but a friend has 3 of the 4 different keys and i have the other.


There are hundreds of key combinations. You can order as many locks as desired, in any amount. I have a locksmith in the family who has ordered me 30 locks all keyed alike. Just tell them what key number you have and how many you would like?
 
There are some videos on youtube of 8 year old kids removing trigger locks in less than a minute.Something to think about if you rely on rigger locks to keep your kids away from your guns.
 
You're right on that one Gatehouse!!...Not very "criminal proof" are they ??....Cost me 10 FRIGGEN bucks cause I wouldn't believe for one second that you could use a butterknife and slide it in between the halves...give it a twist or a hard smack with your hand...and it was OFF!!:mad:
 
If the trigger lock is installed properly you won't find all these quick fixes so easy... you will mark up your trigger guard trying them...
 
Back
Top Bottom