Husky ‘98 & Brno 601 front sight blades

[QueensHorseman]

The Husky is an early, unmarked ‘98 action with thumb cut in 9.3x57 and the front sight takes blades that push in front to back. No set screws so must be an interference fit. The Brno 601 has the factory push button on the front sight ramp and the blades also push in from the front.

I’m looking for a source of different height and style of front sight blades. Some say the NECG blades will fit but I would like to be sure.

Any experienced suggestions appreciated.

 

[geologist]

The Husky is an early, unmarked ‘98 action with thumb cut in 9.3x57 and the front sight takes blades that push in front to back. No set screws so must be an interference fit. The Brno 601 has the factory push button on the front sight ramp and the blades also push in from the front.

I’m looking for a source of different height and style of front sight blades. Some say the NECG blades will fit but I would like to be sure.

Any experienced suggestions appreciated.

I had to replace the front sight on my 602 when I shortened the barrel.

I can't remember which store I ordered it from but will try to find it.

I probably still have the original higher bead sight somewhere. It's the push button style too.

 

[jamesharrison]

You'll have to dress down [file to fit] whichever ones you buy.

While Numrich has some, I replaced mine with ones having a flip-up "ivory" night bead. I'm trying to remember where I got them.