I need Load data for 9.3x57 Mauser please help

rci2950

rci2950

BANNED
CGN frequent flyer
EE REVOKED
EE Expired
Rating - 98.1%
52   1   0
I am loading for a Husqvarna model 46 small ring mauser. I have 285 grain Prvi bullets. So far the only reliable data i can find is for Norma powders. I only have IMR and winchester powders. Can someone help me with this?


Thanks

Adam
 
Yes. I knew i asked about this but i couldn't get anything to come up using the search function. I was starting to think i was going crazy. Thank you LOL Either way, i loaded the rifle using the data from the "Cartriges of the world" and it is awesome. I didnt shoot for pattern just minute of deer type for now. I just put 5 rounds through it to check for function. Even the scope wasn't that far off. at 100 yards it was hitting 8 inches high but horizontally pretty close. Kicks pretty hard though. Nothing bad. but you know you fired it.


Slamfire said:
Deja vu? :p

https://www.canadiangunnutz.com/for...nding-trustworthy-Load-data-for-9-3x57-Mauser
Click to expand...
 
IMR4895 is very good in the 9.3x57, IMR3031 is good too.

I've loaded up to 46 gr IMR4895 with a 280 gr bullet in the M46, and it shot very well but 16" right/low to the iron sights. I backed off the load a grain at a time and settled at 37.5 gr which puts me 2.5 inches high at 100yds and 1860fps mv. I use the 46 gr IMR4895 load in a scoped M98 Husqvarna. Excellent powder for 9.3x57.
 
"Load data for 9.3x57 Mauser" I just did a very fast search on Yahoo and came up with a nice selection.
Try it. Then use Google, MSN and other search engine's
 
You must log in or register to reply here.
Back
Top Bottom