IMR 4895 what calibers is it best suited for?

A vast range - pretty much any "standard" rifle cartridge up to 375, and any "magnum" rifle cartridge from 375 up. Even "magnums" up to 375 can use it for light bullets and/or reduced loads.

That doesn't mean that IMR4895 and H4895 are "magic" powders - they just happen to be a "fast" rifle powder, and many others of similar burn rate do the same thing.
 
From doing more digging I do see that it is a good choice for 9.3x62 with, say, 250 gr. Others like 308 look promising as well.

I also accept Boomer's synopsis - it appears to be a fair bottom line of the powder.

Time to try it out on at least those 2 calibers.

Thanks to all
 
.223 load I developed with IMR4895 because it was the only powder I had in quantity at the time. Work your charges up for safety, and you might find you'll need to -.2 gr as my scale seems to be off by that much.

50gr V Max .224
Win case F/L sized and trimmed
CCI BR4

COAL 2.292 (Sav12 1-7)
26gr. IMR 4895

COAL 2.260 (Rem700 SPS)
25.8gr. IMR4895

3250-3270 fps
decent groups at 100m, never tested beyond that.
 
There's a saying that, "if your .308 won't shoot well with IMR 4895, then you have a rifle problem". A great choice for any of the MILSURP ctgs and MILSPEC for USGI 7.62 and .30-06 ctgs, incl ball, AP and match rounds. It, H4895 and IMR 4064 are the only way to go for Garand reloaders. When I reloaded for the .348 Win it was the best of a number of powders.
 
It is like asking "What cars are best with regular gas?"

Powders come in 4 speeds - Fast, Medium, Slow and Super Slow.

4895 is Medium. perfect many calibers. With small cases it is good for heavy bullets. For large cases it is good with light bullets.
 
Anyone try IMR 4895 w/ success in .308 using 175 SMK /178 AMAX projectiles in particular. I am wondering if these are too heavy and better luck would be had w/ 155 or 168 gr's.
 
Back
Top Bottom