IN-STOCK: All-New TYPE 81 SR

been trying this since Wednesday. website still keeps giving me the card error when trying to use Visa to pay. I email the sales dept at TI to try and place an order but no response yet.
 
Not sure if this had been already answered...but what would be the main advantage of ordering the slant compensator over the flash hider?

Also if the slant is ordered, would it already come installed in the properly timed position?
 
CZ Shooter said:
Not sure if this had been already answered...but what would be the main advantage of ordering the slant compensator over the flash hider?

Also if the slant is ordered, would it already come installed in the properly timed position?
Click to expand...

The slant is much shorter then the flash suppressor and compensator. All the muzzle devices are timed with a spring detent - very easy to install and get the timing correct.
 
CZ Shooter said:
Not sure if this had been already answered...but what would be the main advantage of ordering the slant compensator over the flash hider?

i personally see no advantage of ordering a slant with a heavy barrel. in terms of looks, if you ordered a NPZ scope i would go with the flash hdier.

Also if the slant is ordered, would it already come installed in the properly timed position?
Click to expand...

no, they are not installed at the factory cos they are accessories. there are recesses for the timed position, pretty simply really. you choose 1 or 2.
 
JeffMan said:
The slant is much shorter then the flash suppressor and compensator. All the muzzle devices are timed with a spring detent - very easy to install and get the timing correct.
Click to expand...

Thank you.
Would anyone know the thread/pitch size for this one and would there be any benefits to the slant in this particular set-up?

Based on my limited understanding, the slant was designed to mitigate the full auto fire, but not sure if it would be of any use on the bench?
 
CZ Shooter said:
Based on my limited understanding, the slant was designed to mitigate the full auto fire, but not sure if it would be of any use on the bench?
Click to expand...

slant wont work with the SR.

Murray 3-D said:
The Type 81 SRs seem to have the M16x1mm muzzle thread.
Click to expand...

seems weird, the last shipment of LMG was 14mx1mm but the SR switched back to the M16. you would think they would continue with M14.
 
I have found that slant breaks absolutely suck. At least on VZs i tried them on in the past. They cause bad cheek slap type recoil and major POI shifts. Im pretty sure they were made to tame full auto firing on a AK, and from what i understand they were not used long ether. Functionality useless in my opinion, and maybe detrimental. all looks..
 
boss351cleveland said:
I have found that slant breaks absolutely suck. At least on VZs i tried them on in the past. They cause bad cheek slap type recoil and major POI shifts. Im pretty sure they were made to tame full auto firing on a AK, and from what i understand they were not used long ether. Functionality useless in my opinion, and maybe detrimental. all looks..
Click to expand...

That’s interesting. I’ve shot with slant breaks, flash hiders, and compensators and didn’t notice any POI shift - but then I had always zeroed the rifle with the affixed muzzle device; That is to say that I don't every recall installing a muzzle device after it was zeroed, so I wouldn’t notice any POI shift.

Can the muzzle device really alter POI without striking the bullet? … seems maybe it could.
 
JeffMan said:
That’s interesting. I’ve shot with slant breaks, flash hiders, and compensators and didn’t notice any POI shift - but then I had always zeroed the rifle with the affixed muzzle device; That is to say that I don't every recall installing a muzzle device after it was zeroed, so I wouldn’t notice any POI shift.

Can the muzzle device really alter POI without striking the bullet? … seems maybe it could.
Click to expand...

He was probably running the infamous Dlask slant brake. Its design was way too aggressive for the barrel length, balancing point and overall weight of the VZ rifle. I ran a Tapco slant on my SKS for a season and it was fine. I ended up swapping it out cus it did nothing towards reducing the recoil. The Corwin Arms slant brake also worked fine on my VZ.
 
The recoil should be verrry reasonable on this x39 given rifle's heft and short stroke gas system I think will help too. Not sure how much a muzzle break is needed and also the flash hider just looks ###y/right on this beast ;)
 
Curtton said:
slant wont work with the SR.



seems weird, the last shipment of LMG was 14mx1mm but the SR switched back to the M16. you would think they would continue with M14.
Click to expand...

M16 threaded barrels was probably all that remained in the factory parts bin haha just guess.
 
Curtton said:
slant wont work with the SR.



seems weird, the last shipment of LMG was 14mx1mm but the SR switched back to the M16. you would think they would continue with M14.
Click to expand...

When you say it won't work with the SR, did you mean it won't physically thread onto it (different dimention), or it won't work as "it won't do anything"?
 
You must log in or register to reply here.
Back
Top Bottom