Install for Alex Ipsc mount

[Czarface]

Purchased a Tanfoglio and now turning it to an open gun, my question is when installing the mount do you use lock tight blue or red and where? I was told blue lock tight on frame for mount and red lock tight securing the red dot to mount? Thanks

 

[JOJOPINTO]

use blue all around, if your screws and holes are clean and dry it will last forever if not disturbed, plus its hard to remove a optic if you have to heat a screw with red locktite...

 

[kb007]

I'd use red on the screws into the frame, then blue on the optic / mount screws on an open gun (if you're going to shoot major). I used blue once on my frame and they backed out after a few hundred rounds. Last time I used red and no issues.

 

[snooker]

Use blue all around......used properly, it's all you need, just like JOJO says.
If you use red -- you won't care for the effort or results when it's removal time.
Consider red to be a "permanent solution".