juancarlos
CGN frequent flyer
- Location
- The Island
I ordered a TruGlo small fiber optics front sight for $9 from Brownell's. It's in the mail. I'll post a pic once I get it installed.
Last edited:
Interest in Mossberg 590A1 14" or 14" 590A1 CYL/MOD Barrels imported by Irunguns?
- Thread starter st1264
- Start date
Can someone measure the gap between the forend and barrel ring on their 14" 590A1 for me please? If there's enough real estate along the mag tube then my CDI MTC flashlight mount should work. Mine won't be here till next Thursday.
Taccessories has the Hogue 12" LOP stock (just bought one). Also going to buy the Choate pistol grip stock (about 13" LOP) on Brownell's and the sight that Juan posted below.
I ordered a TruGlo small fiber optics front sight for $9 from Brownell's. It's in the mail. I'll post a pic once I get it installed.
Last edited:
I ordered a TruGlo small fiber optics front sight for $9 from Brownell's. It's in the mail. I'll post a pic once I get it installed.
Hown easy is it to remove the bead and replace it with the fibre optic one?
juancarlos
CGN frequent flyer
- Location
- The Island
Last edited:
Although I haven't shot with my 14" yet, my recoil pad although thick - feels hard as a rock. I think felt recoil is going to be quite stiff on this one. My 18.5" 590A1 I owned a little while ago, had a much softer, pliable recoil pad. I could be wrong, but these hard recoil pads don't seem to absorb much recoil and your shoulder takes it all.
Anyone receive one with a more pliable recoil pad? I guess it doesn't matter that much as I have 2 stocks on order anyway...
Think I will shoot it with the OEM stock and slap my wood stock w/soft recoil pad on there and see the difference.
Anyone receive one with a more pliable recoil pad? I guess it doesn't matter that much as I have 2 stocks on order anyway...
Think I will shoot it with the OEM stock and slap my wood stock w/soft recoil pad on there and see the difference.
Anyone have a wood set from a Field model, forend made for the short action bars? I like how mine feels with a wood buttstock.
Old wood stock has a longer & thicker pistol grip section on my 14" 590A1 and shaves off a good inch of LOP. Might strip it and paint/stain it black. I have other stocks coming to try but I'm impressed with the feel of the old wood stock. Of course, options are limited to the short action bar forend unless I can find a short wood set, if anyone has a short wood forend and set made for the 6.5-6.75" action bars, PM me with pics. I have a WTB ad in the EE.
Below is my 18.5" Road Blocker with stock brake and Hogue overmolded forend/PG.
Old wood stock has a longer & thicker pistol grip section on my 14" 590A1 and shaves off a good inch of LOP. Might strip it and paint/stain it black. I have other stocks coming to try but I'm impressed with the feel of the old wood stock. Of course, options are limited to the short action bar forend unless I can find a short wood set, if anyone has a short wood forend and set made for the 6.5-6.75" action bars, PM me with pics. I have a WTB ad in the EE.
Below is my 18.5" Road Blocker with stock brake and Hogue overmolded forend/PG.
Had a little fun today with an old dining table on the farm... leaned it up to an earthen backstop and shot 10rds of 7.5 and 10 rds of 00 Buck from 15ft. Shot my Roadblocker from the hip so unsure if you'll be able to see the spread or any type of pattern. It was getting so dark I needed a flashlight to find my spent shells...
Entrance:
Exit:
Shotty's
Entrance:
Exit:
Shotty's
Last edited:
That's a nice shotgun on the bottom.
All you need is to find at least 28 in barrel for it, and you are all set.
No thanks. Had a 28" and never used it. I got what I need. Maybe I'll cut a wood stock to a PGO to meet the overall length of 26" and try it...
I posted a thread in Irunguns section about the importation of 14" barrels, especially the modified version that seems to have the demand. If you want one, go post over there.
http://www.canadiangunnutz.com/foru...KE-barrel-importation?p=10660923#post10660923
http://www.canadiangunnutz.com/foru...KE-barrel-importation?p=10660923#post10660923
Elmwood has them in stock with speedfed stock and ghost ring
Modified Choke, Speedfeed and Ghost Rings, $711.25. They just got a bunch in stock.
Item No 86200
Make Mossberg
Model 590A1 COMPACT GHOST RING, SPEED FEED STOCK
Calibre 12 GA X 3"
Barrel Length (inches) 14.0 HEAVY WALL BARREL, FIXED MODIFIED CHOKE
Shots 5 TUBULAR MAGAZINIE
Condition New
Legal Classification Non-Restricted
Action Pump Action
Action Notes DUAL ACTION BARS
Catalog No 52689
Date added 2014-11-04
Detail PARKERIZED FINISH, SPEED FEED BUTT STOCK WITH AMMO STORAGE, TACTICAL RIBBED FORE END WITH HAND STRAP, STEEL TRIGGER GUARD, MIL SPEC TANG SAFETY BUTTON, GHOST RING ADJUSTABLE REAR SIGHT, TRITIUM FRONT SIGHT, SWIVEL STUDS, SLING
Sold No
Cool. I've got two shotguns with GR sights already though, no need or want for another.
I'd rather install a PIC rail on my 14" bead gun and put a red dot on it than have GR's.
I've heard way too many stories about accuracy issues with GR's on short barrels. I think wanting GR's is mostly a "look" thing for people.
Also, at that pricepoint I'd rather get a 12.5" 870 Dlask for less.
It would also prevent me from having a second Speedfeed stock in my parts bin.
Last edited:
Do you know if the bead sight is still visible with the picatinny rail installed? I'm asking anticipating a scenario where the red dot ####s the bed/battery dies (no time to change) and you take off the red dot via the QD attachment in order to continue shooting with the bead sight.
