Intersurplus 30-06 rifles?

Hi all,

I'm new to big caliber rifles and was looking for a cheap bush/beater larger cal rifle and seen intersurplus has some cheap fn98 and m98s. However I haven't seen many reviews of them. Can anyone comment on the reliability accuracy etc? Also what's the difference between the m and fn lines ?

Do you re-load? I have bought a number if Intersuplus Husky rifles in 30-06 and 9.2x57 and 9.2x62.

The cheapest was a almost mint M96 Mauser in 9.2x57. Solid steel iron sights. It is a "cheap bush/beater larger cal". It would be my pissing rain or very heavy snow fall hunting rifle. I should cut the barrel back to 20".
 
Maybe what the OP has in mind?

AE4D3FA1-AE5D-4972-AFD7-C9CE4E1DAA09_1_201_a.jpg

Was a number of purchases - I think the action with the Hellquist sight was originally in 8x57 from TradeEx - Husqvarna brand. Then the barrel was from a 9.3x57 Husqvarna barrelled action bought on CGN. I cut that barrel back to circa 20" and re-crowned and re-attached the front sight. Was set into a Boyd's Laminate stock that I bought from CGN - intention is to fire 285 grain cast lead bullets - I have not fired it yet.
 

Attachments

  • AE4D3FA1-AE5D-4972-AFD7-C9CE4E1DAA09_1_201_a.jpg
    AE4D3FA1-AE5D-4972-AFD7-C9CE4E1DAA09_1_201_a.jpg
    83.9 KB · Views: 253
There are better guns for the money then a IS husky, or a savage axis/Ruger American. You just got to poke around a bit. I would rather over pay for nice stuff then get a deal on junk.

You would have to do more than "emote" to prove that to me.

I don't like Savage bolt action rifles because I find them FUGLY, but I most certainly won't degrade their quality or accuracy.

Anyone having issues with the Husqvarna platforms either doesn't know how well-made they are or how to handle them, from my experience.

Depending on which model was purchased, the triggers may be confusing, or in the case of Intersurplus offerings, the stocks have been "modified" to suit the previous owner.

One of the obvious "improvements" on many of those firearms will be the addition of a "glued-on" cheek riser. These actually make sense, when you consider why this was done.

First, it was quite normal for European rifles to be mounted with very high scopes, which made it impossible to achieve a good cheek weld to the stock and center your pupil to the center of the scope, and keep parallax in check.

Many European shooters are very handy with tools and like others independent and cheap. So they modify the stocks to fit, without taking it to a smith or purchasing aftermarket products.

Stocks will often be "shortened" on both ends to bring down weight, and fit the shooter, or if it's only being shot off the bench, or a prone position for comfort/ergonomics.

Intersurplus is very good with its description of the firearms for sale. Some of them will very likely need to be modified to suit the new shooter.

If you aren't handy, which isn't a sin, and the description/pictures show something you can't live with, don't buy.

However, if you're looking for a very decent platform to build a custom rifle on, then Intersurplus is a very good place to start looking.

Yes, they're "old tech" but I, personally, find a lot of the "new tech" uncomfortable and fugly.

I love double-set triggers. They can be hard to get used to, but once the system is practiced, it becomes easy and natural. Great extra safety features as well.

If you like wood stocks, these rifles usually have stocks that need a bit of TLC. If you're not into it, don't buy.

Many of these rifles are being sold for the price of their actions. They're a much better value than the "surplus" actions that used to be available.

They come drilled and tapped, often with decent scope mounts, good triggers or adjustable triggers, decent wood, and decent bores.

Almost all of them have aftermarket accessories available.

If I'm looking for a basis for a custom rifle, for myself, Intersurplus and a few other sellers of these fine old-tech rifles are where I go.
 
Do you re-load? I have bought a number if Intersuplus Husky rifles in 30-06 and 9.2x57 and 9.2x62.

The cheapest was a almost mint M96 Mauser in 9.2x57. Solid steel iron sights. It is a "cheap bush/beater larger cal". It would be my pissing rain or very heavy snow fall hunting rifle. I should cut the barrel back to 20".

Heluva Scout Rifle!!
 
If you don't mind 8x57, the Zastava assembled sporters (1997 made) are pretty damn nice. A few site sponsors carry them. All parts are new (old factory stock), polished/reblued and nicely fitted. I absolutely love mine.

mSQZm1m.jpg
20231106_192020.jpg
 

Attachments

  • mSQZm1m.jpg
    mSQZm1m.jpg
    143.1 KB · Views: 187
  • 20231106_192020.jpg
    20231106_192020.jpg
    59.7 KB · Views: 184
I have a couple FN98s from them and Tradex. And I've got Husqvarna 1600/1640s. If you can spend a hundred or two more on the 1600/1640, you won't be sorry you did. They're not fancy, but I'd say my Husqvarna's are as good or better rifles than ones I spent thousands of dollars on.

The thing to watch out for are cracked stocks. Wood stocks crack all the time and a small split behind the tang is common and really no big deal. These rifles crack a lot under the action though - between the mag well and trigger. Not hard to fix, but Interpurplus might not know about it. Get one with wood in the best condition you can find. It's worth the extra $50 bucks for a "very good" condition model.
 
Considering when the thread was started, the OP could have ordered, received, cleaned and been to the range with a nice new-to-him rifle. LOL
 
You're right.

But that's a custom rifle. You have to put money and skill into it to make it look like that and shoot good.

So, tripple the cost and pray it works out...

I almost built on once. I bought a M38 that had a cut-down military stock. I thought I would run an add for an unaltered stock to "restore" the rifle to original configuration. A guy from "fun-post" responded to my ad, he had a couple good trader ratings, we agreed on a price, I sent money. He got his money, I never got the stock. I contacted the site owner, and they had already blocked him. He had screwed a bunch of other people. I advertised for a sporter stock, and never found one. I was toing to buy a Bushnell Scout Scope, a Bad Ace Scout mount. I ended up selling the rifle for more than I paid for it; enough more it covered the money I spend on the non existing stock. Right after it was gone I bought a M38 in original configuration for a good price; it came with a bushnell scout scope; a BadAce Scout mount and the original rear sight and spring. I immediately put the original sight back on it and had no trouble selling the Bushnell and mount here.

Moral of the story; don't sell any guns... Not practical all the time to keep everything. LOL.
 
Voere titan11 in 30.06 also known as k15 klingunther,Mauser 225,and Mauser 99 all same rifle,German made .couple still available at intersurplus
 
Voere titan11 in 30.06 also known as k15 klingunther,Mauser 225,and Mauser 99 all same rifle,German made .couple still available at intersurplus

That's a good suggestion. The Voere Titan II (same barreled action as a Kleinguenther K15) is a very nice rifle--well-built with quality all-steel construction, very accurate, with a good barrel and smooth-operating action, albeit a little heavy. In my opinion, getting one that is fully operational and in good condition for $500-$700 is very good value for money.
 
Last edited:
Back
Top Bottom