Introducing a TNA-made tool that makes reloading SKS much easier

True North Arms Corp

True North Arms Corp

CGN frequent flyer
Business Member
Rating - 99.1%
110   1   1
Location
GTA
Hey guys,

As you know, reloading an SKS can be difficult as there is a slight curve in the stripper clips. We have created this tool that makes reloading much faster and your shooting experience more enjoyable.
This tool makes reloading SKS so much easier!-3.jpg

Check out this whole Youtube video we made on it:

Tell know what you think and what other tools would make your life easier?🤔

Cheers,
-True North Arms
 
Jahnj0584 said:
Imagine dying in a vietnam trench because your thumb was too owey after using a curved stripper clip. If only the GI's had military issue 3D printed pushers!
Click to expand...
The GI's were issued M-16s in the hope that it'd be a better rifle, although a lot of them were curious about the SKS they could collect off a dead Charlie. There's even a US Army manual explaining in English how to use and clean your new-to-you SKS!
 
Files are on the internet

I've printed a bunch off


Under the following terms:​

  1. Attribution — You must give appropriate credit , provide a link to the license, and indicate if changes were made . You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
 
Last edited:
Is this why my EE post got nuked for my loaders? After over a year of having zero issues...

Weak ass sauce there.

I had spacers before as well it was a pain to stock.

There is a much better design for spacer from a guy on gp and ebay.... made from better materials too. I cant link here.

Even removed the link to my hobby site from my signature.

If you are going to be a #####, be the whole #####. Cant compete with a guy in his garage... get mods to remove the competition. Very liberal of you lol
 
Last edited:
Boltgun said:
there's a do-dad for everyone out there. I could see this being of use for the older folks with arthritic hands who still wanna blast.
Click to expand...
Having used one *once* it’s actually easier to do it properly, lift the nose of the top round ever so slightly and push down, slides like butter, your still fighting the curvature with these and looking at this particular one all the pressure is on the front of the round, exactly opposite of where it should be
 
nbd said:
Is this why my EE post got nuked for my loaders? After over a year of having zero issues...

Weak ass sauce there.

I had spacers before as well it was a pain to stock.

There is a much better design for spacer from a guy on gp and ebay.... made from better materials too. I cant link here.

Even removed the link to my hobby site from my signature.

If you are going to be a #####, be the whole #####. Cant compete with a guy in his garage... get mods to remove the competition. Very liberal of you lol
Click to expand...
in all fairness, TNA is a paying business member here. If you are, then create your own forum on the site. Mods removed the post (as per the sub line on your post) as a business solicitation link which is against the forum rules.
 
nbd said:
Is this why my EE post got nuked for my loaders? After over a year of having zero issues...

Weak ass sauce there.

I had spacers before as well it was a pain to stock.

There is a much better design for spacer from a guy on gp and ebay.... made from better materials too. I cant link here.

Even removed the link to my hobby site from my signature.

If you are going to be a #####, be the whole #####. Cant compete with a guy in his garage... get mods to remove the competition. Very liberal of you lol
Click to expand...
weird thing with only 1 seller review

I've had all my 3D printed things and signature removed years before yours chap, they want you to pay for the commercial account if you are selling anything you made.

Its CGN, not TNA. I was printing things no one else made or designed.
 
Boltgun said:
in all fairness, TNA is a paying business member here. If you are, then create your own forum on the site. Mods removed the post (as per the sub line on your post) as a business solicitation link which is against the forum rules.
Click to expand...
People make money flipping guns here too.

Besides the point. If timing of it wasnt so funny i probably wouldnt care...or the fact that the little spacer is pretty much the thing i started to make and sell pretty early on.

They also "borrowed" some other designs. At least credit the creator and not play funky games.
 
Jahnj0584 said:
weird thing with only 1 seller review

I've had all my 3D printed things and signature removed years before yours chap, they want you to pay for the commercial account if you are selling anything you made.

Its CGN, not TNA. I was printing things no one else made or designed.
Click to expand...
I was giving things away that I made, asking for postage only.

I got a slap on the wrist, told to pay for a commercial membership
 
yomomma said:
I was giving things away that I made, asking for postage only.

I got a slap on the wrist, told to pay for a commercial membership
Click to expand...

Happened to me years ago when one guy complained.

Then you see people who are clearly not business members or traders do the same and nothing happens. Yes they paid for super gunnutz or whatever but that's not a business membership. It would be nice if the administrator would not allow gray zones or make it clear so everybody gets treated equally.
 
  • Like
Reactions: nbd
Happened to me too. Was asking if people wanted stuff made, I could design it and ship it out for cost of shipping. Got warned that I need to pay.

CGN needs to realize that 1. If it wasn’t for us regular folk here there wouldn’t be any sponsors to pay the website and 2. There are other sites we can be on as well.

Gotta extract every last cent I guess.
 
  • Like
Reactions: nbd
Red_Liner740 said:
Happened to me too. Was asking if people wanted stuff made, I could design it and ship it out for cost of shipping. Got warned that I need to pay.

CGN needs to realize that 1. If it wasn’t for us regular folk here there wouldn’t be any sponsors to pay the website and 2. There are other sites we can be on as well.

Gotta extract every last cent I guess.
Click to expand...
Ive heard about the greaseball practices from a friend who was in the industry and had some insider knowledge first hand. But this... wow.
 
You must log in or register to reply here.
Back
Top Bottom