Introduction to Epic Polymer Systems

You guys should definitely consider making stocks and frames for pistols. Custom glock polymer frames in a color the buyer wants with finger grooves that the buyer wants and sizing the buyer wants. Not sure if you can do this in Canada though due to the serial number being on the frame of glocks ...
 
richmyster said:
You guys should definitely consider making stocks and frames for pistols. Custom glock polymer frames in a color the buyer wants with finger grooves that the buyer wants and sizing the buyer wants. Not sure if you can do this in Canada though due to the serial number being on the frame of glocks ...
Click to expand...

Just thought of something else, you guys could make your own line of interchangeable back grips for gen 4's. The ones they have now don't really vary in size, and you could add a beaver tail to yours, a flatter back, etc... or if you went with the entire custom frame, you could sell a base model frame, and then sell interchangeable finger grooves and back grips! Genious i say! Genious!
 
Aniest said:
Yeah, you should make clear (or close to clear) plastic pads about 150mm (6") x 300mm (12") and 2mm (1/8") thick so gun counters have them to place handguns on: they could be used inside glass cases as well as on top of the counter.
Click to expand...

I didn't read 37 pages of posts, but I still think you'd do awesome on those. I'd buy a couple and I don't even own a gun store.

Then again, some could say I am biased:
hdffej said:
I won!!!!
Click to expand...

It seems I have won also, thank you very much. :D :D :D

PM returned...
 
Has anyone suggested molded inserts for 5 gallon pails?

I used to use a home made one for shooting PPC. Short lipped bin that sits at the top of the pail to hold mags, speed loaders, etc.
 
another nice thing would be a molded muliple rifle rack, something like below with bottom and upper sold in 6 rifle packs... as you add more guns you add anothe package, tops and bottoms seperate with the bottom deep/depth enough to hole a large rifle with BIG scope on it... also another advantage would be staggered heights so you can rack your shorter guns like ar15's and have another rack for your longer gun. even offering 4 gun, 6 gun and 8 gun long modules. you could mix and match... have an 8 gun bottom, with 2 seperate 4 gun uppers at different heights.

also make them so that they have pegs for rubber bands or bungy to securly hold the firearms in.

files.php
 
TinkerBell said:
another nice thing would be a molded muliple rifle rack, something like below with bottom and upper sold in 6 rifle packs... as you add more guns you add anothe package, tops and bottoms seperate with the bottom deep/depth enough to hole a large rifle with BIG scope on it... also another advantage would be staggered heights so you can rack your shorter guns like ar15's and have another rack for your longer gun. even offering 4 gun, 6 gun and 8 gun long modules. you could mix and match... have an 8 gun bottom, with 2 seperate 4 gun uppers at different heights.

also make them so that they have pegs for rubber bands or bungy to securly hold the firearms in.

files.php
Click to expand...

I like that, that is something I could use.

Shawn
 
czechsanchez said:
the problem is the curvature on 10/22 mags

Imagine how much cooler these would look if the mags were just straight on an angle like a UMP or something
Click to expand...

I don't think that is the problem, and Mp5 mags are curved too so that would not solve anything

HKRMP5DK003-9.jpg


What was mentioned before was the the marauder mag so you can use M4 sized pouches to hold them. That way you don't have to buy another rig or pouches just for your 22.

g36-mag-1.jpg


Both a straight mag and a marauder mag would sell great though. so build both pleas :D

Shawn
 
458 SOCOM pistol mags would sell extremely well, make those and you'll be rich and famous overnight.

Anybody know if this is actuall doable?
 
TinkerBell said:
how about making a plastic insert to fit inside the spring of the magpul magazines to limit them to 5 rounds and then the dealers can just put a pop rivet in the base plate to make it permenant rather then a pop rivet in the spine of the magazine.

will make it easier to plug the magazine as well as make it fit more guns better.
Click to expand...

x2, also for FAL mags too!
 
TinkerBell said:
how about making a plastic insert to fit inside the spring of the magpul magazines to limit them to 5 rounds and then the dealers can just put a pop rivet in the base plate to make it permenant rather then a pop rivet in the spine of the magazine.

will make it easier to plug the magazine as well as make it fit more guns better.
Click to expand...

Would that not make it so you cannot swap out the baseplate for the ranger plates??
 
Didn't read all the post and I would bet all money it's been covered. So I will second the motion for custom sks stocks. Heck I even have a donor for testing. I have long monkey limbs so need a long lop or adjustable. Not very impressed with what I've seen out there.

Ian
 
You must log in or register to reply here.
Back
Top Bottom