Israeli Mauser was refurbished by Israeli arsenal. G24 type.

Glad you brought that up sir. Regards position the rounds in the magazine. One fella stated he also noted this. He was using and M14 or FAL stripper clip. He then switched back to original 7.92 stripper clip with 7.62 ball ammo.Then most of his feeding issues went away. Maybe?
 
Glad you brought that up sir. Regards position the rounds in the magazine. One fella stated he also noted this. He was using and M14 or FAL stripper clip. He then switched back to original 7.92 stripper clip with 7.62 ball ammo.Then most of his feeding issues went away. Maybe?

Maybe! Definitely sounds like something to experiment with if someone was having issues.
 
Glad you brought that up sir. Regards position the rounds in the magazine. One fella stated he also noted this. He was using and M14 or FAL stripper clip. He then switched back to original 7.92 stripper clip with 7.62 ball ammo.Then most of his feeding issues went away. Maybe?
Reg 8mm mauser ones, is all I use for 308/762. Only get skipping if rounds are too far forward.
 
Cornelius. Very nice K98 Mauser indeed.
Resoectfully, there are internet rumors these specific 7.62 rifles have feeding issues.
Could u please confirm or refute this allegation?
Thank you for the wonderful photos.
I spent a few years in Romania, I just returned, As soon as the weather will warm in the spring I will test, me too I am curious. Never seen a Israeli milsurp in this superb condition.
 
Reg 8mm mauser ones, is all I use for 308/762. Only get skipping if rounds are too far forward.

Was wondering about that...Since you do get skipping when rounds are too far forward, if the job was done improperly, can it be easier to end up with rounds too far forward?
 
Was wondering about that...Since you do get skipping when rounds are too far forward, if the job was done improperly, can it be easier to end up with rounds too far forward?
It is not all the time, and if it does. It is only on the first round chambering. My guess the recoil and cycling the bolt back sets the rest back.
 
It is not all the time, and if it does. It is only on the first round chambering. My guess the recoil and cycling the bolt back sets the rest back.
Makes sense. The same way a poorly crimped bullet in a big rifle like my 375 goes deeper into the case lol
 
Makes sense. The same way a poorly crimped bullet in a big rifle like my 375 goes deeper into the case lol
I hope you didn’t pay full fare. Someone filled in drill and tap holes on that receiver and tried to mask it by re-engraving the original markings.
 
Last edited:
I hope you didn’t pay full fare. Someone filled in still and tap holes on that receiver and tried to mask it by re-engraving the original markings.

He paid 600.

Well that explains the glossy reblue and the sporter safety

Nice shooter for the price
 
Cornelunc, from your pics that rifle looks to have been drilled and tapped for a scope, then the hole plugged and repaired.

The charger guides have also been ground off.

IMHO, someone sporterized that rifle.

Maybe just the lighting?

Still very nice rifle
 
Well most were produced in occupied CZ.
Most were German ww2 production. Some were post war. The ones with the large trigger guard.were post war Czech. Many had no identifying markings post war as the Czechs were interested in sales but didn't want to be drug through a knot hole over armament sales to foreign belligerents.
 
Yep. Lots of Mg 34s went over as part of Operation Balak too. 5000 ish
Most of the TNW MG34 parts kits came from Israeli surplus MG34's from those shipments. I owned a couple of them (before they got prohibited, of course!), and both kits were ex-israeli with the markings to prove it.
 
Most were German ww2 production. Some were post war. The ones with the large trigger guard.were post war Czech. Many had no identifying markings post war as the Czechs were interested in sales but didn't want to be drug through a knot hole over armament sales to foreign belligerents.
As I understand things, most (all?) the Israeli K98ks were purchased from Czechoslovakia and had been refurbed there post-war before the Israelis got them. I've seen almost every imaginable K98k receiver type used, including VZ24, K98k, M98, Gew98, even a commercial Standard Model. Originally they were supplied to Israel all in 7.92 and rebuilt to WW2-era K98k configuration, re-numbered matching by the Czechs. The Israelis converted them to 7.62 later on, domestically, using US-supplied barrels. Sometimes you still see an Israeli-used gun still in 7.92, but much rarer than 7.62 nowadays.
 
Cornelunc, from your pics that rifle looks to have been drilled and tapped for a scope, then the hole plugged and repaired.

The charger guides have also been ground off.

IMHO, someone sporterized that rifle.

Maybe just the lighting?

Still very nice rifle
That was my feeling as well. I have never heard mention of an Israeli 98 being "refurbed" to the extent of the one in the OP. It brings to mind the Hardcastle "refurbs". I've bought and sold a few of the LE's, but I've always made it clear to the buyer that the rifle has been refurbished locally, not by a miltary establishment.
 
I agree. I havenever seen an israeli 7.62 Mauser with the charger guides ground off or screw holes plugged. Such a receiver would have been rejected from service if, for no other reason that it could not be fed from chargers.

Whoever previously owned that rifle tried to disguise it having been sporterized and then de-sporterized. Definitely.
 
When the Israeli converted 98s first started coming into Canada, Alan Lever and myself went the the International Firearms Warehouse in Montreal.

Alan was a broker/buyer per se.

He bought rifles for his store, as well as for several other stores in BC, Alberta and if memory serves, the Yukon, for a store which had arrangements with an outlet up there to provide this type of firearm to the Indigenous folks requiring them. By this time most of those folks wanted something "better" and usually bought their own.

One requirement for all of the rifles sent to the Yukon was that they were to be in NEW ONLY condition. We were second in line to go through the several thousand rifles at the warehouse. S.I.R had first pick.

S.I.R. bought a lot of firearms from International. More than Lever Arms. When such firearms came up for sale, after all sorts of final "customs" issues they would send out information to different distributors across Canada.

I'm not sure how they established their pecking order, but in this case, Lever was second. Cash is king in these transactions, recorded of course, and maybe Mr Lever had been involved in acquiring the firearms. He has a lot of connections in Israel. The rifle all had to be routed through the UK, before they came to Canada, where they were warehoused, inspected again, for grade, condition and how many would be set aside for US distribution, where they wouldn't bring as much money, but sales in one state would be greater than all of Canada.

SIR went straight to the NEW crates, opened a couple of dozen and purchased the equivalent of a couple of container loads.

Mr Lever had orders for 1200 rifles in NEW condition and immediately put in a request for 150 crates of new rifles. The order was just barely filled and he also had orders for an additional 1500 rifles in issued but Very Good to Excellent condition. These were also in crates, but instead of 8 rifles, these crates contained 12 and didn't come with matching accessories, actually no accessories. So, to round things off, he ordered 150 crates of the slightly lesser grade rifles. Then, he bought an additional 2500 rifles of Good to Very Good condition grade on 5 pallets. These were unique in that each rifle was separated by heavy cardboard strips, so they wouldn't rub against each other. Unusual for milsurps from military warehouses, when they're being disposed of. Someone was taking care.

So it wouldn't be particularly unusual for Cornelunc to have come across a fresh FTR rifle.

Remember, almost all of these Mausers, other than later orders out of Belgium were FTRS. They were surplus, bought in Europe, issued in Israel, went through all sorts of extremes and then returned to the military, who contracted the conversions to 7.62 NATO. There are people on this site with much more info than I have.

That's why you see many of them with huge numbers arced out of their receivers and stocks, with Czech, German, etc receivers, mismatched parts, you name it and some rifles, which were purpose built for Israel from Belgium with Israeli crests on their receivers.

The last Israeli Mauser I had was stampe SWP45, in a mismatched laminated stock, almost no blue, loose and rattling but with almost perfect headspace and an excellent bore. It shot surplus Nato ammunition better than the ammo was built to shoot.

Cornelunc, if that were my rifle, I would mount a period scope on it and shoot it as is.
 
Cornelunc, from your pics that rifle looks to have been drilled and tapped for a scope, then the hole plugged and repaired.

The charger guides have also been ground off.

IMHO, someone sporterized that rifle.

Maybe just the lighting?

Still very nice rifle
Gerard, I did not think a moment that this Mauser was made to look so great locally. I was sure that was inside job in Israel military factory.
 
Back
Top Bottom